Продажа, установка и сервис IP-АТС Samsung: OfficeServ7070, OfficeServ7100, OfficeServ7200, OfficeServ7400, Samsung Communication Manager

SMT-W5100 v1.05.04 (080228)

Прошивки для Wi-Fi телефона Samsung SMT-W5100.

Модераторы: LionB, Wi$e

Правила форума
Самостоятельная замена рабочего ПО (ROM) производится на Ваш страх и риск т.к. может привести к неработоспособности оборудования!

SMT-W5100 v1.05.04 (080228)

Сообщение Wi$e » 05 ноя 2008, 18:10

Аватара пользователя
Wi$e
Администратор
 
Торренты: 509
Комментарии: 63
Раздал: 197.4 Гб
Скачал: 2.29 Гб
Ратио: 86.158
Сообщения: 4561
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Re: SMT-W5100 v1.05.04 (080228)

Сообщение Wi$e » 05 ноя 2008, 18:13

New Version Changes
’08.02.28 SMT-W5100_Office_V01.05.04
SMT-W5100 S/W changed items

S/W Compatibility Table :

MODEL OS 7200 OS 7400 SMT-R2000 WIP
VERSION V4.21 V4.21 V2.05 above V01.05.04
DATE 2008.02.29 2008.02.29 2007.04.18 2008.02.28

1) Change the number of inbox/outbox’s capacity in “Menu >3.Message”.
- Inbox capacity from 20 to 100. Out box capacity from 10 to 30.
2) When user uses CTI tool, “Disconnection “function didn’t work. So add “Disconnection” flow.
But WIFI phone does not support CTI interface because MCP software should be changed in order to support other feature such as “Transfer”, “Direct Pickup and etc.
3) String modification from “PA Mode” to “Non SIP mode” from “Menu > 8.System>1.Registration > System1~4”.
4) Remove “System DHCP” from “Menu > 8.System>1.Registration > System1~4 >2.Non SIP Mode” because System DHCP does not work in “Non SIP Mode”.
You need to put IP addresses into MMC848 only when SMT-W5100 is used system DHCP mode.
5) Fixed the reboot problem when users select "menu ->phonebook -> outgoing calls / Incoming calls / missed calls" after making or receiving a call over 16 digit numbers.

’08.01.25 SMT-W5100_Office_V01.05.02
SMT-W5100 S/W changed items
6) Broadcom driver update to solve Ring Delay and Endless Ring problem.
7) When the phone receives the SIP error message, there is the problem that the DB of the phone was deleted. In this version of software, when the phone receives SIP error message, phone will be display “register fail icon” and continue retrying to register.
8) When making a phone call on SPnet, Ring back tone is generated only one time by the phone.
9) When user selects "Menu> phonebook >Outgoing/Incoming/Missed Call Log", Call log are not sorted in recent time. It’s fixed.

’07.12.10 SMT-W5100_Office_V01.05.00
SMT-W5100 S/W changed items
10) Phone registration and call function are implemented by using the NON SIP messages (Proprietary message) instead of SIP message.
This is implemented in order to support REMOTE WIP feature. This feature only supported MCP V4.21 (or later version of software than V4.21) and SMT-W5100 V01.05.04 (or later version of software than this). Regarding the details of setting on both system and SMT-W5100, please refer to the additional document or VoWLAN Administration Guide.
11) The function to synchronize the System MMC parameter data with phone data (volume level/ packetization time/ side tone / etc..) is implemented. For the feature, you have to use both MCP V4.21 (or later version of software than V4.21) and SMT-W5100 V01.05.04 (or later version of software than this). As for the details, pleas refer to the VoWLAN Administration Guide.
12) During using the "AP call test" function (hidden menu), Side tone problem is happened. It’s fixed.
13) Although the SMT-W5100 is not registered, the handset displays "Register Fail" instead of "Unregistered" so we correct it. Now it will be displayed as "Unregistered".
14) SL(signal level) display error is fixed at "AP call test" (hidden menu).
15) LAN interface will be disabled when handset fails to register.
16) Set PS(power save bit) field in management packet to 0(disable).
PS bit should be of management packet should be set to “0”. But this value set to “1” in the earlier versions of software and it may cause a problem. So we fixed it.
17) Add function: Searching SSID automatically.
So far you need to set the SSID manually but you can select it either MANUAL or AUTO mode.
When you set it to AUTO, SMT-W5100 scans AP’s and shows their SSID so you can select one of them.
18) Add interface to access to FON AP [FON ID / PASSWORD]
For the feature, you have to use both MCP V4.21 (or later version of software than V4.21) and SMT-W5100 V01.05.04 (or later version of software than this). As for the details, pleas refer to the VoWLAN Administration Guide.
19) Add function: Network setting / SSID Setting in <System menu>.
Here you can see NETWORK information that you put during the registration. In addition, you can change some of them without re-registration
Regarding SSID Setting, when SSID needs to be changed with changing Network information, you can change existing SSID to others without re-registration.
20) Add function : Display IP & MAC Address
You can check them on “MENU > 8.SYSTEM”.
Аватара пользователя
Wi$e
Администратор
 
Торренты: 509
Комментарии: 63
Раздал: 197.4 Гб
Скачал: 2.29 Гб
Ратио: 86.158
Сообщения: 4561
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725


Вернуться в SMT-W5100

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2


Продажа, установка и сервис IP-АТС NEC: SL1000, SV9100, SV9300, SV8100, SV8300, SV9500, SV8500



Пириногвые IP-АТС Symway. Консультация, Поставка, Внедрение.