Продажа IP телефонов Htek по хоршим ценам

Прошивка OfficeServ 7200 MP20 v5.01 20170228

Прошивки для АТС Samsung OfficeServ7200.

Модератор: TOPPEHTEP

Правила форума
Возможность загрузки файлов доступна интеграторам и корпоративным клиентам!
По вопросам поддержки и доступа Вы можете обратиться:
- На электронную почту: Samsung@OfficeATS.ru
- По телефону: +7 (499) 653-71-72

Прошивка OfficeServ 7200 MP20 v5.01 20170228

Сообщение Wi$e 24 май 2017, 01:34

Прошивка процессора MP20 для АТС Samsung OfficeServ 7200, версия 5.01 20170228.
New Version Changes
’17.02.28 V5.01
[New/Enhanced features]
1. [TE16904Q/ALL/ALL] CLI of transferred SIP Phone (Requested by South Africa)
<Descriptions>
Assume A, B, and C are as follows
A: incoming trunk with CLI or a phone
B: phone
C: 3rd party SIP phone
A and B made a call each other and B transfer the call to C. In this case SIP phone C display only CLI of phone B.
From V5.01, the CLI of B is displayed when the call is incoming, and the CLI of A is displayed when the call is answered.
<Restrictions>
This feature works only by using 3rd party sip phone supporting display of P-Asserted-Identity header
<Options>
New option is added as follows. And this feature works when it’s enabled.
- KMMC 842 - XFER CID (Disable/Enable)
- DM 2.7.2 - Original Caller ID on Transfer (Disable/Enable)

2. [-/MP40, MP20/ALL] Add recovery feature of suspended SIP task
<Description>
If SIP task is suspended, it is recovered as follows.
- If SIP task is suspended, restart only SIP task after monitoring
- If recovery of suspended SIP task occurs five times, system reboots immediately.
- If recovery of suspended SIP task occurs under five times, system will reboot at 03:10

3. [TE166031/ALL/ALL] CLI name translation (Requested by UK)
<Description>
The number of digits supported in DM 3.2.6 CLI name translation / MMC728 increases from 14 digits to 16 digits

4. [-/MP20S,MP10A/ALL] Restriction of downgrading to under V4.95 by using OfficeServ DM at New NAND MP20S/MP10A system.
<Description>
We would call MP20S, MP10A produced with V4.95 or later new NAND system.
New NAND MP20S, MP10A system cannot work with under V4.95 package because MP20S, MP10A with under V4.95 cannot recognize new NAND flash.
Therefore we restrict to downgrade to under V4.95 by using OfficeServ DM.
For your reference, if you use new NAND MP20S or MP10A system with V4.99 and try to upload under V4.95 package by using OfficeServ DM, you can upload it but the MP20S or MP10A cannot boot up.

[Bug Fix]
1. [TE169055/ALL/ALL] Mid Session Re-Invite. (Reported by USA)
<Description>
When an incoming call from SIP Trunk is forwarded to external number or Mobex via SIP Trunk like tandem call, OfficeServ receives session Re-Invite from both SIP Trunk and cannot reply to Re-Invite. Due to that, the issue happens and fixed it.

2. [TE16B04V/ALL/ALL] Call from Phonebook routes via SPNet Problem. (Reported by Australia)
<Description>
When using the keyset phonebook (System or Personal) to call this number, the system incorrectly attempts to dial via SPNET trunks, instead of using first trunk group. This is fixed

3. [-/MP40, MP20/only Russia] TCP of SIP Signal Type
<Description>
When country code is Russia, you could not choose TCP as SIP signal type (MMC833, MMC837). From V5.01, you can choose TCP as SIP signal type.

4. [TE16706U/ALL/ALL] Officeserv sending wrong SDP when receiving "session attribute sendonly (Reported by UK)
<Description>
SIP provider (BT) send a Session attribute set to the "sendonly". OfficeServ should send the response in the Session attribute not the media attribute. However if SIP provider (BT) send the ”sendonly” as a media attribute OfficeServ should respond using a media attribute.
But OfficeServ always responded only using media attribute.
OfficeServ responds same level attribute from V5.01.


5. [TE16704R/MP10A,MP20S/ALL] VM Lockup (Reported by USA)
<Description>
This issue can happen by buffer overflow when a specific data traffic come into the CLI module. When buffer overflow happens, CPU of VM stops working.
Based on above fact, there seems to be port scan or connecting attempt to specific port at the customer site. This buffer overflow is fixed.
This could occur using from V4.80 to V4.95 of OS7100 MP10A or OS7200 MP20S.

6. [TE16A021/ALL/ALL] Spnet overflow failure (Reported by UK)
<Description>
Overflowed call after being transferred cannot be overflowed via SPnet right now.
This is fixed.

7. [-/except for MP40/ALL] recovery of SLI3 card
<Description>
When SPI bus error of SLI3 occurs, OfficeServ recover it.

8. [-/ALL/ALL] Exclusive hold of IP Phone
<Description>
When a phone presses hold button twice in one second during talking with trunk user, exclusive hold feature works. But specific IP phone could recognize twice pressing in one second.
Therefore excusive time is changed from 1 second to 1.5 seconds.

9. [TE16B01K/ALL/ALL] IPUMS Silence heard before greetings or prompts are played. (Reported by Australia)
<Description>
When a call is connected to IP-UMS, the codec sent by MGI and the codec sent by IP-UMS were different. Fixed the codec sent by MGI to work with the codec sent by IP-UMS.

10. [TE17103W/Linux System/ALL] OS7200 MP20S - ISDN BRI & PRI Cutting off. (Reported by UK)
<Description>
This issue happens when ISDN Supplementary Service is set to ON and software version is V4.99 or V4.98.
The default value differs from systems and PRI/BRI service.

1. OS7200 & OS7400
- The default value of SS service is OFF for BRI & PRI.
- There is option to set SS Service to OFF/ON for BRI & PRI.
Therefore, when you experience ISDN call dropping issue on V4.98, you can resolve by SS Service to OFF.

2. OS7030, OS7100 and OS7200s.
- The default value of SS service is ON for BRI & PRI.
- There is option to set SS Service to OFF/ON for PRI.
- There is no option to set SS Service to OFF/ON for BRI. Therefore, you cannot set SS Service to OFF for BRI.

Therefore,
1) When you experience PRI call dropping issue on V4.99, you can resolve by SS Service to OFF.
2) However, when you experience BRI call dropping issue on V4.99, you MUST apply V5.01 (or T4.99g) to resolve the issue. OR downgrade the software to V4.95 (V4.93 in case of OS7030).

11. [TE17103P/ALL/ALL] Intermittent One Way Speech when using MPS (Reported by Australia)
<Description>
The issue happens because MPS channel is locked on certain case as follows. This is fixed.
- Station group A consists of IP phones and SIP phones.
- Station group B consists of IP phones and SIP phones same as member of station group A..
- When an incoming SIP trunk call goes to Station Group A and one SIP phone of station group A rejects the call.
- The call overflow to station group B
- One IP phone of station group A answer the call.
- In this case the MPS channel used by IP phone is locked up.

12. [#TE16803P/MP40,MP20/ALL] ‘SIP Register Per User fails’ Issue is fixed. (Reported by Australia
<Description>
In case of using SIP Register Per User feature (DM 5.2.14) at V4.98, SIP registrations are failed. This issue is fixed.

[Security]
1. [-/MP40, MP20/ALL] CLEAR PASSCODE - ADM and DEVICE TEST - COLSET DM ACL options are deleted for security
<Description>
CLEAR PASSCODE - ADM and DEVICE TEST - COLSET DM ACL options are deleted for security
<Alternative method>
If you want to know how to initialize DM password of Admin or DM ACL IP Lists, contact HQ

2. [-/ALL/ALL] Added option to disable telnet connection of MGI16/MGI64/OAS
<Description>
Option to disable telnet connection of MGI16/MGI64/OAS is added for security.
This option is applicable only when using MGI16/64 V1.32, OAS V2.11 or later version.
If you are using MGI16/64 V1.31, OAS V2.10 or earlier, it will be enabled as before.

<Option>
- KMMC 831 - TELNET USE
- DM 2.2.2 MGI Card - Telnet Use


5
0
Голосов нет
4
0
Голосов нет
3
0
Голосов нет
2
0
Голосов нет
1
0
Голосов нет
 
Всего голосов : 0

Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.25 Гб
Скачал: 2.29 Гб
Ратио: 86.528
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Вернуться в Officeserv7200 ROMS

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1


Продажа, установка и сервис IP-АТС Panasonic: KX-NS500, KX-NS1000, KX-NCP, KX-TDE, KX-TDA



Пириногвые IP-АТС Symway. Консультация, Поставка, Внедрение.
cron