Прошивка SMT-i5343v1.33 (2015.03.05)
Добавлено: 09 апр 2015, 21:02Прошивка для IP телефона SMT-i5343 OSPP (OfficeServ Proprietary Protocol), Версия 1.33 2015.03.05.
New Version Changes
V01.33 (2015.03.05)
* New features
1. USB upgrade feature is added in Factory mode(even if IP address is not assigned).
2. Factory Test mode is changed(PBA Test, Main AFT Test)
3. Multi languages are added.
(Turkish, Russian, Spanish, German, Dutch, French, Portuguese, Swedish, Greek)
* Fixed problems
1. SDM Call failure issue was fixed.
(If contact and Calllog are include in (,),+,- character, Cannot make call from SDM when making call by contact or Call log)
2. New key does not saved at OfficeServ in Italian language SDM.
(new key does not saved in system and dose not appear on Smart phone/ Tablet upon refleshing)
3. Bluetooth headset is disconnected at this point someone leaves a VM message on the extension
4. SMT-i5343 phone doesn’t login when trying to login the SMT-i5343 with SDM NFC autologin
(this issue was occurred in case of smart phone number include (,),+,- characters)
4. Program key count was extended max 99.
(Press Program button and check it. This function is supported when press fixed Program button
New Version Changes
V01.33 (2015.03.05)
* New features
1. USB upgrade feature is added in Factory mode(even if IP address is not assigned).
2. Factory Test mode is changed(PBA Test, Main AFT Test)
3. Multi languages are added.
(Turkish, Russian, Spanish, German, Dutch, French, Portuguese, Swedish, Greek)
* Fixed problems
1. SDM Call failure issue was fixed.
(If contact and Calllog are include in (,),+,- character, Cannot make call from SDM when making call by contact or Call log)
2. New key does not saved at OfficeServ in Italian language SDM.
(new key does not saved in system and dose not appear on Smart phone/ Tablet upon refleshing)
3. Bluetooth headset is disconnected at this point someone leaves a VM message on the extension
4. SMT-i5343 phone doesn’t login when trying to login the SMT-i5343 with SDM NFC autologin
(this issue was occurred in case of smart phone number include (,),+,- characters)
4. Program key count was extended max 99.
(Press Program button and check it. This function is supported when press fixed Program button