IP АТС NEC: SL1000, SV9100, SV9300, SV8100, SV8300, SV9500, SV8500

SCME SW PATCH v5.3.0.12 20150508

ПО и Патчи для Samsung Communication Manager Express

Модератор: TOPPEHTEP

SCME SW PATCH v5.3.0.12 20150508

Сообщение Wi$e 29 май 2015, 21:39

Обновление ПО для сервера IP платформы Samsung Communication Manager (SCMe), версия 5.3.0.12 20150508.

< Cautions! >
[Potential Issue]
After upgrading from {V5.2.0 or lower version than V5.2.0} to {V5.3.0 and higher}, the password of SCM Administrator can be cleared. Therefore, some account users are not able to log into the SCM server.
You can prevent the issue by one of the solution below.


[Solution 1 to avoid the issue]
Before upgrading to V5.3.0 or higher version, please change or re-enter the password of all User ID’s for SCM Administrator.

[Solution 2 to avoid the issue]
After upgrading, please confirm if all User ID’s can log into SCM Administrator.
In case a User ID is not able to log into the System, the password of the User ID should be set again by other User ID with Engineer Class, who can log into the system.

[Note] In V5.4.0 and higher, when executing “start_upgrade”, “start_upgrade” script will check if the passwords have an error and print a warning message to console so that the customer change or re-enter the password before upgrading software.

[Management > Access Permission > Account List]

New Version 5.3.0.x Changes:
V5.3.0.12
< Upgrade Cautions! >
 After upgrading to V5.2.0.5, the SSH and SFTP connection failure error can happen in PC which is storing old SCME's SSH and SFTP connection information (cache file).
 Solution: Delete old SCME's SSH and SFTP connection information (cache file) in PC.

< SSL, SSH, NTP Downgrade Cautions! >
 When downgrading from V5.3.0.x to a lower version, refer to “V5.3.0.5 Cautions” page in `SCM Express V5.3 Configuration Guide` document.


1. [-/-/-] The menu of Broad Message History was added
- [PERFORMANCE >Detailed Event History > Broad Message History]
- The operation history of broad message was displayed.
2. [-/-/Korea] Internal DID feature for incoming call is supported.
3. [-/-/-] Menu tree was added in SCM Administrator. (Configuration > Resource)
- ‘Resource’ tree was added to the menu tree Configuration and some menus were moved.
. Existing menus: Activation Key, License
. New menus: Trunk Service Limitation, Application Service Limitation, Resource State
4. [-/-/-] Resource State menu was added in SCM Administrator.
- ‘Resource State’ displays the User Group specific resource usage for some items.
- However, the capacity constraints can be different according to the license.
- Configuration > Resource > Resource State
5. [-/-/USA] Service list in Service Class menu in SCM Administrator was sorted.
- Service list in create/change dialog of Service Class menu are sorted by string.
6. [-/-/-] Broad Message functionality is supported
- User can use message sending/receiving with android FMC.
7. [-/-/-] added Noticeboard additional functions
- Noticeboard Category function .
- Notice attachment function.
8. [-/-/-] added IP Terminal Options
- Syslog option, wifi option, callog option, hook timer option..
9. [-/-/-] option for color of presence string is added.
10. [-/-/-] ‘delete User Group’ Menu is added.
11. [-/-/-] The name of “Wifi Agent” was changed to “Smart WLAN Link”.
- These names were changed in SCM Administrator.
. Sub menu names in Configuration > Wireless Enterprise
. Single Phone User, Multi-extension Phone: Use Wifi Agent -> Use Smart WLAN Link
. Activation Key: Wifi Agent -> Smart WLAN Link
. Phone Setting > File Upload: Phone Type combo list
12. [-/-/-] Common Service Limitation Feature Added.
- Operator can control Common Application Server or Common Trunk Service for each user group.
- It provides a service to following common type application servers.
- 3rd Party UMS
- 3rd Party Conference
- 3rd Party IVR
- External Ringback Tone
13. [-/-/-] Internal UMS / Internal Conference Call Control Feature Added.
- Operator can control Internal UMS or Internal Conference Service for each user group.
14. [-/-/-] To support Hosted Service, default CSTA license for SC plus and etc. is increased from 10 to 160.
15. [-/-/-] Each User Group can select its own announcement language
16. [-/-/-] Added ‘Job’ type at ‘User Profile Field’ for FMC job search function.
17. [-/-/-] ‘Valid Data’ Option of User Group is Added. After expiration, SCM will reject the request of registration of terminal.
18. [-/-/Korea] The call log of the transfer target could be ‘Transfer Party’ or ‘Held Party’. It depends on the way of transfer such as Blind Transfer, Semi-consultation Transfer and Consultation Transfer. Regardless of the way of transfer, the call log can be ‘Transfer Party’ or Held Party’ by setting the below option.
- [CONFIGURATION>User Group > Change User Group > Options > Call Log for Transferred Party]
19. [-/-/-] GHOST: glibc vulnerability (CVE-2015-0235). SCME updated the gilbc patch.
20. [-/-/-] NTP Version is upgraded to version 4.2.8.
21. [-/-/-] By default, Session Timer is used.
The default value of ‘Call Session Used’ in the [CONFIGURATION > Miscellaneous > System Options] is changed to ENALBE from DISABLE.
22. [-/-/Korea] Although user deactivate call forward service, the destination number will be remained.
23. [-/-/China] Maximum List for Number Translation Table extended.
- [CONFIGURATION > User Group > Change User Group > Number Translation].
- 3000 User: 1000 List  2000 List
- 10000 User: 3000 List
- 30000 User: 3000 List
24. [-/-/Korea] Fixed to set station group number for destination of Hot Line.
25. [-/-/AUS] Multiple SIP Account Route Call Failure is fixed
- ACD call distribution failure from Multiple SIP Account Route is fixed.
- User Number Range in Route menu is supported a designated number without ‘X’.
26. [-/-/Korea] Time difference for Ring Plan Schedule is adjusted.
27. [-/-/USA] ‘No Answer Destination’ of Hunt group was not working. This problem is fixed.
28. [-/-/Korea] ‘CLI for Forwarded Call’ problem is fixed.
29. [-/-/SA] The fault of SIP trace save feature is made up.
30. [-/-/Korea] ‘Transfer Recall’ feature in the [COMFIGURATION > User Group > Change User Group > Options] is fixed.
31. [-/-/AUS] The Forced Audio Codec feature for re-INVITE is supported.
32. [-/-/Korea] Click to dial with FXS phone via CSTA interface became available.
33. [-/-/UK] Premium CID function for Hotel Room problem is fixed when room check in/out
34. [-/-/Korea] Anonymous Call Transfer failure is fixed.
- This problem occurs following configuration.
- No use Transferee restriction policy disabled
- Transferee has toll restriction list that starting digit is ‘0’.
35. [-/-/Korea] When administrator add or delete a line(User) on multi-Extension Phone, SCM does not send notify-event to phone sometimes. This problem is fixed.
36. [-/-/Korea] If there is not ‘/home/samsung’ directory in SCM, noticeboard service is not working.
37. [-/-/Korea] mVoIp service on iPhone is not working because of profile problem.
38. [-/-/USA] Abnormal Block State (LDIB) when LDAP import function is executed consecutively. And LDAP import function is executed only once. Those issues are modified in this patch.
39. [-/-/Korea] APC status is not matched with real APC link status. This issues is modified in this patch.
40. [-/-/USA] Although Call Record service was not permitted in Class of Service, the call record service using call record key was allowed. This problem is fixed.
41. [-/-/AUS] VM password does not initialize in the Mailbox menu.- Fixed.
42. [-/-/AUS] Testcase 41(Blind Transfer on Hold) is supported in the Broadsoft Interoptest.
43. [-/-/AUS] In case of interworking with broadsoft, SCM did not send ‘REGISTER’ message including the ‘minimum expire time’ that the broadsoft sent through ‘423 Interval too brief’. This problem is fixed.


5
0
Голосов нет
4
0
Голосов нет
3
0
Голосов нет
2
0
Голосов нет
1
0
Голосов нет
 
Всего голосов : 0

Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Москва: (495) 646-8048 доб. 101
Питер: (812) 363-1662 доб. 101
Бесплатный Online звонок
С уважением, Денис.
Office-Device
Аватара пользователя
Wi$e
Администратор
 
Торренты: 459
Комментарии: 62
Раздал: 117.68 Гб
Скачал: 767.17 Мб
Ратио: None.
Сообщения: 4350
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Органицация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Вернуться в SCME Software & Patches

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1


IP АТС Panasonic: KX-NS500, KX-NS1000, KX-NCP, KX-TDE, KX-TDA
Серверы NEC