OS7200 MP v4.30d(090326)

[Wi$e]

http://www.officeats.ru/product_info.ph ... ml?fid=718

[Wi$e]

New Version Changes
’09.03.24 V4.30d
Fixed Issues reported by STA
1. [7400] IT 2.1.1 Says MODEM Exist: NO, but I have MODEM card installed and working for OS7400. (reported by STA)
2. [P080923002/ALL] CALL Waiting CLID Issue (reported by STA)
3. [P081029007/7400] OS7200 3RD EXPANSION (reported by STA)
4. [VMWEB/7100,7030]Web Management Voice Studio NEXT and PREVIOUS button not working. (reported by STA)
5. [VMPMT/STA]The English prompts are changed.
6. [N090204001/STA] Clear and default the SIP profile contents in MMC 837
7. [P080626010/ALL] VM Notify/alert notification feature will always use any outbound port to dial out. (Reported by STA) - Fixed in v4.30a
8. [P081115002/7100] Problem with 7100 and Fax call routing of subsequent voice call. (reported by STA)
9. [P081021001/ALL] CALL ROUTING IPUMS ISSUE (reported by STA)
10. [P08092500/7100] 7100 VMS Call progress detection does not detect answer on some cell phones. (reported by STA)
11. [P081202003/7400] DS VOICE MAIL LAMP (reported by STA)
12. [P081025003/ALL] UCD REPORT LONGEST QUEUE TIME (reported by STA)
13. [P081206002/ALL] IT Tool User level restrictions not restricting access. (reported by STA)
14. [STA] STA TEST REPORT ANSWER -> Refer to the attached excel document.
15. When ITP-5112L user mistakenly forces to log in ITP-51xx user with either IDLE MODE DISABLED or software that IDLE MODE Software is not available, ITP-5112L fails to connect to 0S7400. However, to restore ITP-5112L to normal operations, a complete power cycle of OS 7400 is required. (reported by STA)
16. [P090321001] When CC key is assigned in 64B AOM, the call does not ring on the master digital phone. (reported by STA)
- Assign Digital Set with 64 Button AOM on it in MMC 209.
- Assign CC key on 64 Button AOM to another Digital Set.
- Call the other Digital Set and the CC key will flash but never ring on the CC key on the 64B AOM.


Fixed Issues reported by SEUK
17. [P080923005/7200] Incoming SIP calls fail on OS7200 SIP trunks with Telia (Reported by SEUK)
18. [P090108004/ALL]Can't perform announced transfers directly to a sip ext when it is paired with another ext (reported by SEUK)
19. [P081216001/ALL] Ticket 4136 - OS Operator Not Updating Virtual ports (reported by SEUK)
20. [P081222006/ALL] Blind Transfer from Sip Ext to sip ext with Call forward (reported by SEUK)
21. [P090316003] MACRO RTO key does not work (reported by SEUK)
When NGT pass word is set to OFF in MMC300 and RTO is set by MACRO Key, RTO does not work because Ring Plan number is recognized as Password.
22. [P090130001] VMSUCD answers an incoming call through Analog TRK with PRS service, the fist VMS prompt is clipped. (reported by SEUK)

23. [SEG/7400]Send Busy cause when using ISDN trunk. (SEG MP40 Request)

Fixed Issues reported by SEI
24. [P081113015/ALL] SIP stations receive but cannot make any call. SIP server response is "Temporary Anavailable". (reported by SEI) - Fixed in v4.30a
25. [P081023003/ALL] If the message is deleted without reading it, it remains in WIP memory. (reported by SEI) – Fixed in v4.30a
26. [P081023002/ALL] DND ON Soft Menu doesn't work properly when disabled by mean feature code "400" (reported by SEI) – fixed in V4.30a
27. [ALL]System failed to send MWI message to SIP station (reported by SEI)
28. [P090123002 7030/SEI] In case 2BM card is installed in Slave cabinet, if a user tries to send/receive the fax through that BRM card, the fax does not work. (SEI reported)
 Reason : The 2BM Card in installed in the Slave cabinet, the reference clock is not working. By this reason, the fax does not work in the Slave cabinet.
 Result : The reference clock is working in the Slave cabinet.
29. [P090228001] System sends some rough CID name characters in 13th - 15th positions on internal calls (reported by SEI)
30. [P090123004] System must to be restart to make available MGI resources after License has been registered (reported by SEI)
31. [P090123003] System does not notify a mailbox messages to SIP stations (reported by SEI)
32. [P090228002] DT key doesn't work properly when incoming calls ring at a Station Group set as "UNCONDITION"

Fixed Issues reported by GTL
33. [P090204008] In case of unconditional group ring by trunk call, the DT led of the extension which is ringing becomes red on or green on (green flash is normal) (reported by GTL)
34. [VMWEB/7100,7030]Voice studio SAVE or SAVE & EXIT function not working (reported by GTL)
35. [P090310003] The manual call record feature dos not work on v4.30d software but does work on v4.30c (reported by GTL)
36. [P090218019] OS7200 V4.21c SIP peering test with Call Plus (reported by GTL)
37. Cannot make outgoing call when BRI connected to Centrex line (NOT Normal C.O ISDN line) and Overlap dialing mode (NOT Enblock dialing mode).
38. [P081125005/ALL]In OS Call and OS Operator if you set DND status, the keyset light does not flash on iDCS keysets. (reported by GTL) - Fixed in v4.30a

Fixed Issues reported by Plant Communications
39. In case of unconditional group ring by trunk call, the DT led of the extension which is ringing becomes red on or green on (green flash is normal) (reported by GTL)
40. [P081008006/ALL] Chain Fwd cannot be turned off for remote networked site. (reported by Plant Communications-PC)
41. [P081024004/7100] MGI Public IP Address does not update after upgrade. (reported by PC) - Fixed in v4.30a
42. When outgoing calls are made via SIP Trunks from either an IP Phone or SIP Phone (Eyebeam) and MPS is activated, there is no speech (Reported by PC).
There was a bug that causes the no voice issue when access codes from 0 to 9 are not registered in MMC832.
43. SPnet calls calls failed with the message ‘No User Response’ displayed on Keyset or ITP phone display (reported by PC)
44. Issues with Kirk SIP DECT system (reported by PC)
- MPS feature is disabled the consultation transfer feature between the DECT handsets (DECT A calls DECT B, and then DECT B consultation transfers the call to DECT C) has no speech. It was caused by some bugs related to codec negotiations.
- Call release / Clear issue for transferred call.
- Transfer recall issue: When a call is blind transferred between DECT SIP stations and is not answered in 60 seconds the call drops instead of recalling to the transferring phone.
- Call back issue : When MPS is active, the Call Back feature fails. (the station with call back set on it does not ring.)
45. RTO key issue that Mark Reported