OS7200 MP20 v4.51

[Wi$e]

http://www.officeats.ru/product_info.ph ... ml?fid=991
viewtopic.php?f=165&t=5535

[Wi$e]

New Version Changes
’10.08.18 V4.51
1. [P100526001/OS7000/-] Barge In Failure
When 3rd party tries to barge-in and then routes to voice mail, original call is dropped.
Modified not to disconnect current call in the above case.
2. [P100507004/OS7000/-] (SEUK) Communicator shows LCR code
Communicator show the LCR code when call is connected.
Modified to show original dialed number.
3. [P100522004/OS7000/-] (STA) VMAME Feature Broke
IP phone with VMAME key doesn’t hear the message being left by the calling user so they don’t know if to answer or not.
Modified to send audio message during ringing mode.
4. [P100602001/OS7000/-] Virtual SLT ports ring Normal SLT ports
When you have a pot phone connected to the 8 combo card and ring a virtual extension that is in the same slot and port then the pot phone will also ring.
Modified not to send ring message to virtual SLT.
5. [-/OS7000/-] Group pickup info remains on screen.
Group pickup information remains on screen when call is received on analog trunks.
Modified to delete pickup group information in the above case.
6. [-/OS7000/-] Add IP-AOM in MMC841.
7. [-/OS7000/-] Speech comes over the speaker when in headset mode.
Under certain configuration and call scenario you can hear speech coming over the speaker when in headset mode.
Modified not to open speaker path by following SECURE OHVA option.
8. [N091006001/OS7000/-] External Call Forward does not follow Station/Trunk use.
Add Enhanced FWD to MMC210.
If this option and EXT FWD are ON, trunk call can be outgoing or not by following stn/trk use.
9. [P100615003/OS7000/-] WIP cannot answer calls
Cannot answer call to WIP5000 handset.
10. [P100617006/OS7000/-] Auto Answer intermittently not working
Under certain scenario Auto Answer is intermitently not working and instead and Announce ring mode is being used even though the extension is set to use Auto answer.
11. [P100523001/MP20/-] 16-TRK FLASH ISSUE
When you flash the port 5 thru 16 of the 16TRK/8TRK2 card, you will not get dial tone and disconnect the first call.
12. [P100527001/OS7000/USA] Page Timeout Broke
Because of request, MMC 501 page timer will affect during internal paging
13. [P100615001/MP20S/-] MP20S MAIN GRETTING CLICKING
Clicking on the MP20S voice mail main greeting when the main greeting is redone.
14. [P100617004/OS7000/-] UCD Prompts Not clipped
Prompts on the UCD group were not being clipped when an agent becomes free.
15. [P100622003/OS7000/-] P100208005 SIP Hold Reinvite does not work correctly for Transfered calls
16. [P100622004/OS7000/UK,EU] Incorrect SMDR code for UCD to UCD abandoned call. On v4.46d
if a call to UCD Group and go to final destination which is UCD Group, and the caller hangs up when the agent phone is ringing, the system sends a 'C' code and not an 'A' code to SMDR.
17. [P100629004/OS7000/] SMT IP Phone delayed speech problem.
call into a system on alog trunk, answered by an SMTi5243, There is a delay of about 3 seconds
18. [P100706002/OS7000/-] SIP Calls being rejected with a SIP 513 message too big
On an OS7100 when a call to a SIP extension is routed out over an SIP Trunk the call is being rejected with a 513 message too big error.
19. [P100708003/OS7000/-] Peri UCD stats showing 65xxx unanswered calls
If there are calls in the queue when performing either a manual Clear Stats or Automatically then the unanswered calls show 65535 unanswered calls.
20. [P100715002/OS7000/Germany] All SMT-i52xx/ Umlauts are missing after hooked off
Umlauts are not indicated when hooked off at source side
21. [P100724001/MP20/-] MP20 CONFERENCE SQUELL
22. [P100728001/OS7000/-] OS Operator not displaying CLIP Translation Properly
Incoming calls are not showing the callers CLIP Translation name when programmed in MMC728 on OS Operator. Instead of showing the name there are some strange characters
23. [P100729003/OS7000/-] FOLLOW ME FORWARDING ISSUE
In case of follow me feature, MMC 210 Chain Forward option didn't affect.
24. [P100729004/MP20/-] PAGE SUPPERVISOR FEATURE INTERACTION
25. [P100807002/OS7000/-] CBK with station Pair issue
Paired port did not assign a call button when call back ring occured. To assigned a call button is missed.

’10.07.12 V4.50
1. [-/-/-] SEG V450 Issue
2. [-/-/-]The dialed PSTN no. is flickering during redialing with the redial function.
3. [-/OS7400,OS7200 MP20/Australia] Australia Radio Station
- Add Function 1: Radio Station Link On/Off with DT button.
- Add Function 2: Conference call is also connected with Radio Station.
4. [-/OS7030/Germany] OS7030 Germany License
5. [-/OS7400,OS7200 MP20/Algeri] SMDR Buffering
6. [-/-/-] SEG T450 Issue
- Bug No.4 : Internal Dial tone must be German styl
- Bug No.5 : Mismatch Device error
7. [P100615003/OS7400,OS7200 MP20/-] WIP cannot answer calls
8. [-/OS7400,OS7200 MP20/Australia] Australia Radio Station
9. [-/OS7030/Germany] OS7030 Germany License
10. [-/OS7400,OS7200 MP20/Algeri] SMDR Buffering

’10.06.14 V4.48
26. [-/OS7400/USA] Remote Station Function
: Remote Station Function and NS function are same.