OS7100 v4.14

[Wi$e]

http://www.officeats.ru/product_info.ph ... ml?fid=451
http://samsungpbx.mylivepage.ru/file/11 ... 071107.rar

[Wi$e]

Overview :
1. When the first message is left to a station, correct information should be announced.
2. If message alert is answered at the first ring, the system recognizes the caller has answered.
3. Upload prompts on the web page.
4. Improve the Voice Quality of VoIP.
5. Fetch the MSP version. ( V5.05  V6.10 )
6. BRI call fail after booting with line connection.
7. S0 port lock up.
8. T0 port lock up.
9. Standard SIP Phone interface was added
10. SIP/H323 Stack License added
11. Simple IP phone added
12. System Version added
13. VG KEY was applied
14. Hotel Functions are unavailable
15. VMS releases the analog trunk when the calling party released the call.
16. VMS is stable after CR (In Australia)
17. PRS type 3 abnormal operation(In Australia)
18. When digit is pressed during the AA, it stops prompt immediately.
19. Default volume level only for playback prompt is changed to normal volume level, in addition switch gain level is changed.
20. There was no sound at accessing voice mail port sometimes, it fixed this symptom.
21. The disconnect signal in Port block has default value for each country. For example, this value is defined as Reorder in Italy.
22. Mode block issue
23. OS7100 Belgium - cannot select French and Dutch languages for Voicemail
24. VM will not allow more than 2 digits in system wide parameters for email gateway port.
25. VM announce only mailbox reverts to No status.
26. Voicemail and foreign languages key codes return to default on system reset.
27. Repeat Prompts on No entry cannot be set to 0.
28. MP don't receive correct BRM active message.
29. Message Waiting feature added.(SPAIN, ITALY, FRANCE)
30. When use VoIP trunk by H.323, occur one-way speech.
31. Add the feature to change the call progress DB.
32. SIP TASK only can not be restarted in OS7100. So if some options of SIP is changed (ex. MMC841 STACK LICENSE, MMC857 SIPS/SIPT), system has to be restarted.
33. Pager Notification works correctly.
34. Unable to set “Announce hold position” and “Announce hold time” on Eclass.
35. No transparency SETUP IE between T0 e S0 on 2BRM connected to ISDN Network.
36. Wrong CPN information on outgoing call through TEPRIa card
37. Display information is incomplete on blind transfer through SPnet