OS7100 v4.21c 080820

[Wi$e]

http://www.officeats.ru/product_info.ph ... ml?fid=455

[Wi$e]

(1) MCP S/W changed items
Main items
- The database in v4.21C is not compatible with the database in v4.1X or older versions.
Database address was changed because of adding new features. So if the system is upgraded to new version of V4.21C, then the system will be initialized with default database.
But you can upload old version’s database by Installation tool in V4.21C

- Softphone Licence Issue
This issue was change back to old version

Fixed Bugs
1. [P080503002] 7100 Web Management tool List Block cannot clear List member.
 Reason : VM has an error to check data received from web module. When clearing member of list, it is set to 0.But VM do not clear it, if the data is 0.
 Result : VM is fixed to check the data received from web, and decide to delete or not.

2. [P080507001] Cannot clear Extension Block Station Type
 Reason : There is no button to clear assigned value. In SVMi, it can be deleted by Ctrl+Y
 Result : It's fixed. 'Clear' button is located in the pop up page. You can delete assigned value by that button

3. [P080507002] OfficeServ Operator cannot do VT to "phantom" mailbox
 Reason : We did not understand this feature. we detect this case as the error. So Blocked
 Result : It was fixed. We allow this case as normal.

4. [P080506009] Voicemail will not send digits to pager after answering.
 Reason : SVMi uses in band dialing to send dtmf digits after pager answers. But OS7100 VM send message to MP to dial dtmf digits after pager answers.
 Result : It's changed to use in band dialing after pager answers.

5. [P080307001] Softphone Licence Issue
 Reason : This issue was change back to old version V3.34
 Result : It was fixed as V3.34

6. [P080611011] Some labels are missing from "VM/AA" menu of Web Management when language is Italian
 Reason : It does not consider if there is no label in current locale, so it's label is missing.
 Result : It's fixed. If there is no label, replace it with default label(English). Italian labels are not translated, so it isn't included in Italian web language package.

7. [P080630005] RETRY does not work when LCR feature is enabled with ISDN line.
 Reason : In case of LCR or trk group call, call checked the buffer for redial. But if LCR call, the trunk port of redial buffer saved LCR key not trk port. So RETRY does not work when LCR feature is enabled with ISDN line.
 Result : If LCR call, system will try to seizure trunk port.

8. [P080707003] An improper Holiday is set on the OS 7100 VM/AA Schedule Table
 Reason : Schedule table was made by USA, and it has Independence day of USA.
 Result : When the system boots for the first time, if the country is not USA, it removes Independence day of USA in Schedule table.

9. [P080630005] RETRY does not work when LCR feature is enabled with ISDN line.
 Reason : In case of LCR or trk group call, call checked the buffer for redial. But if LCR call, the trunk port of redial buffer saved LCR key not trk port. So RETRY does not work when LCR feature is enabled with ISDN line.
 Result : If LCR call, system will try to seizure trunk port.

10. [P080709015] OS 7100 VM/AA is out of service after HALT/PROCESS command by IT
 Reason : When using UCD function, if the fax call is incoming , VM goes to infinite loop and it looks like being stopped.
 Result : It's fixed. If the fax tone is detected, VM stops playing prompt and exit.

11. [P080710001] Parse Error occurs when you try OS 7100 Voice Studio upload feature
 Reason : There was an syntax error on the upload prompt page.
 Result : It's fixed. The syntax error is fixed.

12. [P080804001] Cannot pick up ringing UCD call with DP key
 Reason : We can't pickup ucd group call after ucd message played. There is a ringback bit to be able to allow pickup call. But if ucd message was played, ringback bit was cleared. So it should be rejected a call pickup. It was a fault.
 Result : It was fixed. The ringback bit maintain the set status correctly after ucd message played

13. [P080704010] A feature (PING RING) is not working well for external call with ITP handset.
 Reason : System does not allow large ip phone support pingring lcd.
 Result : In case of large ip phone, system support 2line pingring lcd.

14. Dial Pulse doesn't work.
 Reason : In Pulse Dial Mode, MP should send to SP to generate the signalling. But missed message and worked as the DTMF mode.
 Result : It was fixed.

15. [P080704010] When used os7400 system with os7200 cabinet, LCP cabinet doesn't work.
 Reason : Card start message was not sent to SP module. So Cards located at OS7200 can't be activated. Just they are in reset mode.
 Result : It was fixed.

16. [P080731020] AoC in Greek Market on Ericcson PTT
 Reason : The fault of MACRO that counts size of the AOC unit structure(6 bytes).
 Result : Correct the MACRO from round counting(a multiple of 4) to actual size counting.

17. [P080725001] Voicemail prompt "The message storage unit is full".
 Reason : VM always checks the empty space of RAMDISK to record message.But since new MP module was larger than old MP, empty space of RAMDISK has been reduced, so VM could not start recording.
 Result : We delete unused library files of RAMDISK and enlarge empty space.

18. [P080621002]IS-TOOL User Accounts: Level 2 or 3 user can access levels restricted.
 Reason : If the level of user is 2 or 3, system must not allow the user change their level in 5.13.5
 Result : If the level of user is 2 or 3, it is restricted to access IT5.13.5.

19. [P080805001] Cannot set DNS server under system parameters.
 Reason : DNS server address was written on the system file (resolv.conf). But this file can be accessed by SIP TASK also. If user try to set dns ip address for SIP server call, this file will be written again. But in this case, it became not to allow others access this file.
 Result : If user try to set dns ip address for SIP server call, this file will be written again. And system will assign others the right for access this file.

20. [P080730005] Easyset Send Msg not working when Info Display is turned on.
 Reason : If info display is turned on, system will not send sms message info.
 Result : Although info display is turned on, system will send sms message info.

21. [P080730006] Cannot set different User Access Parameters for IT Tool
 Reason : System do not send all data.
 Result : Although user level 2 oer 3, system will not skip data

22. [P080730007] IT Tool, delete entries in Toll Deny all entries after are also deleted.
 Reason : If Toll data has NULL bytes between valid data, system will ignore below NULL.
 Result : If Toll data has NULL bytes between valid data, system check another data.

23. How to display version of OS7100 has to be same as the other system's
(YY.MM.DD V4.XX.a → 'YY.MM.DD V4.XXa)
 Reason : How to display version of OS7100 has to be same as the other system's (OS7200 or OS7400)
 Result : OS7100 Version Display Changed like below.
(YY.MM.DD V4.XX.a → 'YY.MM.DD V4.XXa)
24. Allow to change wip codec to 711.
 Reason : In case of basic or dual type, wip can't use any codec without the codec 729 type.But requested to change a codec type to 711.
 Result :
a. In case of wip to wip, wip can use 711 codec.
b. In case of wip to ipp, wip can use 711 codec.
c. In case of wip to dgp, wip can use 711 codec.