OS7100 v4.30a (081208)

[Wi$e]

http://www.officeats.ru/product_info.ph ... ml?fid=700

[Wi$e]

OfficeServ 7100 V4.30a S/W release
Added MOBEX Feature
Advanced IP call’s media path control
Advanced License Control
Applied QNET new features
Fixed V4.30 field test issues. (V4.30a)


1. The previous DB will be erased when upgrading system S/W to V4.30.
2. Only the system whose version is V4.2x or higher than V4.2x can be upgraded to V4.30. If the system version is lower than V4.2x, that system should be upgraded to V4.2x before being upgraded to V4.30.
3. SVMi20E software should be V5.2.1.1 (2008.11.06) or higher version in order to use MP V4.30

New Version Changes
’08.12.08 V4.30a

1. [SEUK] New option added for MOBEX CLI issue. When incoming call routed to MOBEX, the MOBEX phone via SIP trunk didn’t ringing in Sweden because of CLI TRANSFER feature.
− In MMC861, TRUNK->MOBEX CLIP option added.
 TO ISDN (RECEIVED, MASTER, MOBEX)
 TO SIP (RECEIVED, MASTER, MOBEX)
− In MMC837, RCV CLI FWD option added in TRK option.
 ENABLE: The RECEIVED CLI will be inserted to SIP ALIAS field.
2. [SEUK] The MOBEX phone can use barge-in feature, with tone only. (not without tone)
3. [SEUK] Bug fixed. The VM holiday mode didn’t work automatically issue.
4. [SEUK] Default value changed. If Country is UK, the default value of CID DSP ALLOC TM in KMMC501, change form 500 ms to 0 ms.
5. [SEUK] Default data changed. In KMMC751, the default value of ITP, WIP and SIP change from NONE to BOTH, because of the ITP’s mailbox deleted issue when package upgrade.
6. [SEUK] Bug fixed. The BASIC WBS didn’t work issue when package upgrade.
7. [STA] OS7100, Enhanced VM TUI slow issue.
8. [Plant Com.] Bug fixed. In OS7400, the LAN Lock up issue.(In case of DNS query fail )
9. [GTL] Bug fixed. In OS7400, the system restart issue when Fidelio PMS solution send bulk data.
10. [SEI] Bug fixed. In MP10a, the Fax call via BRI trunk failed issue.
11. [MP10a/MP11] Boot image changed. Because of system didn't upgrade CS/MS/RD package by KMMC 818 or IT/Web issue.
12. MP11only. The Router software upgrade to V1.09
− GRE Tunnel over IPSec is provided.
 Please refer to the GRE over IPSec configuration Guide Ed02 and GRE tunnel handbook.
 Changed ZebOS protocol and Web GUI in order to support GRE Tunnel over IPSec in the transport mode.
 Changed Routing Information to recognize GRE in the RIP and OSPF.
− So MP11 supports following functions
 Single GRE tunnel.
 GRE Tunnel over IPSec.
 GRE Tunnel over IPSec with OSPF
− Support Dynamic DNS feature.
− Added new features of the enhanced SIP-ALG feature.
 Enhanced SIP-ALG can support SIP station in the public Area.
− Fixed problem of the switch port status in the 4SWM
13. [P081023002] Bug fixed. SMT-W5100 DND improper work Because Soft Menu DND is not properly updating internal DND status field.
14. [P081029006] Bug fixed. H.323 call does not work when Gatekeeper RAS type is set to Manual in MMC836
15. 7100/7200/7400 1GB SD card compatibility issue => fully applied to V4.30

’08.11.19 V4.30

16. Added MOBEX(Mobile Extension) feature.
17. Advanced IP call’s media path control
18. Advanced License control
19. Advanced several minority features.
20. WebMMC is not supported any more. (From V4.30 user can’t access WebMMC.)
21. Applied QNET new requirements.
22. Applied patch issues form V4.21x, V4.22x, V4.23x and QNET P-issues..