Продажа, установка и сервис IP-АТС NEC: SL1000, SV9100, SV9300, SV8100, SV8300, SV9500, SV8500

Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Прошивки для АТС Samsung OfficeServ7400.

Модератор: TOPPEHTEP

Правила форума
Возможность загрузки файлов доступна интеграторам и корпоративным клиентам!
По вопросам поддержки и доступа Вы можете обратиться:
- На электронную почту: Samsung@OfficeATS.ru
- По телефону: +7 (499) 653-71-72

Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение Wi$e 03 июл 2014, 00:57

Прошивка процессора MP40 для АТС Samsung OfficeServ 7400, версия 4.80 2014.06.05.

New Version Changes
’14.06.05 V4.80
[New Feature]
1. [-/ALL/ALL] Supporting New IP Phone, SMT-i5343
Refers to ‘OfficeServ system Programming guide for SMT-i5343.pptx’ for more details.
2. [-/MP40, MP20, MP20S/ALL] SLI3 Card’s Long Loop Check Feature is added.
<Reason>
When a port of SLI3 card detect long loop, the port was blocked and. You couldn’t disable this feature.
< Modified >
SLI3 Card’s Long Loop Check Feature can be disabled or enabled.
If you select DM 2.1.5 SLI3 Long Loop Check option to Disable, SLI3 Card’s Long Loop Check Feature is disabled. (Default value: Enable)

[Bug Fix]
1. [-/ALL/ALL] pickup Call’s SMDR error
<Issue>
When picking up the call using VMS ringback tone and hanging up the call, SDMR’s I Flag is not printed out.
<Reason>
When picking up the call using VMS ringback tone, SMDR information was not saved internally.
<Modified>
When picking up the call using VMS ringback tone, SMDR information is saved internally.
2. [-/ALL/Argentina] End of ANI (CID) of E1R2 signal is changed in Argentina
<Reason>
Requirement from Argentina.
<Modified>
End of ANI (CID) of E1R2 signal is changed from I-15 to I-12 only in Argentina
3. [P140327001/OS7000/ALL] mmc 856 Watchdog timer restart
<Issue>
Accessing MMC 856 with several entries but register not filled will cause a watchdog timer restart on the switch. With a keyset, access mmc 856 and scroll down to black line, hit the third soft key and the system will restart.
<Reason>
Accessing wrong memory address
<Modified>
Fixed accessing wrong memory address.
4. [P130604001/OS7000/ALL] Group Overflow Time
<Issue>
Incoming trunk call go to hunt group A and overflow VMS group. After that, the call goes to hunt group B from VMS. But the call is applied wrong hunt time.
<Reason>
Internal hunt count was not initialized after transfer to VM,.
<Modified>
Internal hunt count is initialized after transfer to VM.
5. [P130529003/OS7000/ALL] Call Wait display does not clear down
<Issue>
Station A, B,C are a member of uncondition type’s station group. Station A talks to someone through SPNET. Incoming SIP Trunk call goes to this station group and Station A or B answer the call. In this case, station A’s display show call waiting information continuously.
This problem arises only in case of using SMT IP phone like SMT-i3100, SMT-i5120, SMT-5220
<Reason>
In this case, OfficeServ didn’t send a message related to clearing call wait to SMT phone.
<Modified>
OfficeServ send a message related to clearing call wait to SMT phone..
6. [-/ALL/ALL] SIP trunk Unsupervised transfer to WIP no speech
<Issue>
A station which is talking with incoming SIP Trunk makes a blind transfer to WIP-5120, there was no speech.
<Reason>
In this case, OfficeServ didn’t send a message related to audio control to WIP phone.
<Modified>
OfficeServ send a message related to audio control to WIP phone.
7. [-/ALL/ALL] Not creating user mailbox for security
<Reason>
After factory reset user mailbox is created automatically.
< Modified >
After factory reset user mailbox is not created automatically for security.
DM 5.9.1 User mail box’s default value is changed from Both to None.
8. [-/ALL/ALL] Auto answer from voicemail
<Issue>
Although DM 5.15.2 Auto Answer CO option is Off, Auto Answer CO feature worked abnormally
<Reason>
Auto answer co feature didn’t depend on Auto Answer CO option about trunk incoming call
< Modified >
In this case, auto answer co feature work or not as Auto Answer CO option is set or not
9. [-/ALL/ALL] Wrong DS key’s station number.
<Issue>
Set relocation between 2 stations and save DM 4.9.2 DS key related to set relocation.
You can see wrong DS key’s station number.
<Reason>
There was a port number error between OfficeServ and DM
< Modified >
The port number error is fixed.
10. [-/ALL/ALL] Problem of receiving T.38 fax through H.323
<Issue>
OfficeServ cannot receive T.38 fax through H.323
<Reason>
When receiving T.38 fax, message related to T.38 fax was not sent to H.323 task.
< Modified >
When receiving T.38 fax, message related to T.38 fax is sent to H.323 task.
11. [-/ALL/ALL] UCD final destination over SPNet tromboned call fails
<Issue>
When Incoming ISDN call is directed over SPNet and returns back on SPNet to UCD group, dialling final UCD destination results in call disconnect. The call must go to final destination.
<Reason>
There was a SPNet route optimization during listening UCD prompt. The SPNet route optimization made a wrong call flow
< Modified >
SPNet route optimization will be accomplished after answering the call.
12. [-/ALL/ALL] Loss of RX on outgoing call
<Issue>
when a call, internal or external, to a voicemail AA(site A) is transferred by selecting an AA option to an SPNet extension(site B), which has forward all set back to an extension at site A, which is on an outgoing ISDN call then RX will be lost as off hook ringing begins.
It only occurs when the call is transferred by voicemail AA
<Reason>
Wrong handling internal digit buffer made a voice path problem
< Modified >
Handing internal digit buffer was fixed.
13. [-/ALL/ALL] Open Mic after VT transfer
<Issue>
DID incoming call goes to station A and answer the call. The station A makes a supervised transfer to station B and do not hang up the call Station B do VT transfer to station C.
The outside caller can now hear a open mic from an internal station in a idle condition.
<Reason>
VT transfer must works only after supervised transfer complete. But VT transfer works before not completing.
< Modified >
VT transfer doesn’t work and is ignored before supervised transfer complete.
14. [-/ALL/ALL] WB codec of call between WE VoIP and WE VoIP
<Issue>
WE VoIP call to some extension except for WE VoIP, but WE VoIP answers the call by reason of Station Pair, Ring Group, Pick-up. The call between WE VoIP and WE VoIP cannot be made by using WB codec.
<Reason>
OfficeServ made a decision for codec from first destination
< Modified >
OfficeServ makes a decision for codec from final destination
15. [-/ALL/ALL] Consultative transfer call’s wrong call duration time of SMDR
<Issue>
Consultative transferred party’s call duration time is accumulated
<Reason>
Consultative transferred party’s call duration time is accumulated
< Modified >
Consultative transferred party’s call duration time is newly calculated after transferred party answers the call.
16. [-/ALL/Italy] WE VoIP’s Italian language is added.
<Issue>
When set call forward or DND by using feature code from WE VoIP, confirm messages of the setting in WE VoIP show in English instead of Italian.
<Reason>
Some messages related to call forward or DND in WE VoIP cannot be displayed in Italian.
< Modified >
Some messages related to call forward or DND in WE VoIP can be displayed in Italian.
17. [-/ALL/ALL] SMT-i series’ Missed Calls indicator
<Issue>
If it is missed calls occurs then message waiting indicator is flashing.
Then if you visit call log menu and check unanswered calls list and back to the home screen then message waiting indicator continue to flash.
<Reason>
In this case, OfficesServ didn’t send led off message to SMT phone.
< Modified >
OfficesServ send led off message to SMT phone.
18. [-/ALL/ALL] Internal Conference Ports Not Releasing
<Issue>
After the conference ports are being used, they are not releasing intermittently.
<Reason>
When OfficeServ receive abnormal message from DGP during conference, the conference resource is not released
< Modified >
When OfficeServ receive abnormal message from DGP during conference, OfficeServ releases the conference resource
19. [-/ALL/ALL] Voicemail audio cuts off with SVM IP Service enabled.
<Issue>
When Incoming call is directed over SPNET and returns back on SPNET to SVMi-20i in IP Service enabled condition, About ½ of the SVMi-20i’s greeting plays and then we lose audio
<Reason>
MP does not send the message for voice path change to SVMi-20i when the SVMi-20i voice path is changed from IP to DTM by SPnet Route Optimize Feature
< Modified >
MP sends the message for voice path change to SVMi-20i when the SVMi-20i voice path is changed from IP to DTM by SPnet Route Optimize Feature
20. [-/ALL/ALL] Page from SIP extension
<Issue>
Page initialized from SIP extension seems to work but have no speech.
<Reason>
Page feature from a SIP extension is not supported
< Modified >
When SIP extension dials page feature code, OfficeServ send 404 not found message to SIP extension.
21. [-/ALL/ALL] Unifying some SIP option names in DM and KMMC
<Issue>
Option names of User Name, Auth User Name, Auth Password were different at each menu in DM or KMMC
< Modified >
Unifying option names of User Name, Auth User Name, Auth Password
22. [-/MP40,MP20/ALL] MAC Address Recovery
<Issue>
Intermittently MP40 or MP20’s MAC address is initialized after boot-up
< Modified >
In case that MAC address is initialized after boot-up, MAC address will be recovered.
23. [-/ALL /ALL] Trunk call’s DND forward
<Issue>
Station A set to call forward to station B. Station B is DND and set to DND forward to Station C. When call from outside routes to station A, the call don’t go to Station C but Station B.
<Reason>
Checking DND forward’s status have some problem.
< Modified >
Checking DND forward’s status is fixed.
24. [-/ALL /ALL] wrong SMDR’s outgoing dial number through overlap SPNET
<Issue>
Set up overlap SPNET and make a call from Large IP Phone like SMT series through SPNET.
In this case, first 4 digit of outgoing dial number in SMDR is cut.
<Reason>
Routine about controlling internal dial buffer has some problem.
< Modified >
Fixed routine about controlling internal dial buffer.
25. [-/ALL /ALL] 911 PRI Routing at normal type’s room in hotel feature.
<Issue>
When hotel feature is enabled and the room is set for normal in MMC 221, the calls will route out the PRI trunk group and work normally. But if someone makes a call from the room which has no deposit by dialing DM 4.8.4 Toll override number, the call doesn’t route out.
<Reason>
Routine about checking toll override number have some problem.
< Modified >
Fixed routine about checking toll override number.


5
0
Голосов нет
4
0
Голосов нет
3
0
Голосов нет
2
0
Голосов нет
1
0
Голосов нет
 
Всего голосов : 0

Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.25 Гб
Скачал: 2.29 Гб
Ратио: 86.528
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение lbeaver 10 июл 2014, 16:33

В SMT phone series version table сказано, что для SMT-i5264 нужна прошивка V1.33 (2014.02.08), но здесь таковой не наблюдается. Можно залить? :oops:
OS7400: MP40 v5.01, LP40 v2.04, TEPRIa v4.28, MGI64 v1.32, OAS v2.11, SVMi-20i v6.09, 8TRK2, 16SLI3
SMT: i3105 v1.73, i5210 v1.54, i5220 v2.65, i5230 v1.38, i5243 v1.97, i5264 v1.35, i6021 v1.40
lbeaver
Участник
 
Торренты: 0
Комментарии: 5
Раздал: 5.2 Гб
Скачал: 1.12 Гб
Ратио: None.
Сообщения: 51
Зарегистрирован: 10 янв 2012, 13:06
Квалификация: Системный администратор
Организация: Энергия Юга

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение LionB 04 авг 2014, 14:03

Прошивка для SMT-i5264 общая и для OfficeServ и для SCME http://forum.officeats.ru/viewtopic.php?f=254&t=8971
LionB
Модератор
 
Торренты: 0
Комментарии: 24
Раздал: 83.96 Мб
Скачал: 41.92 Мб
Ратио: None.
Сообщения: 6528
Зарегистрирован: 04 апр 2008, 09:28

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение lbeaver 04 авг 2014, 14:54

Спасибо, но есть подозрение о нехватке прав для скачивания из того раздела.
OS7400: MP40 v5.01, LP40 v2.04, TEPRIa v4.28, MGI64 v1.32, OAS v2.11, SVMi-20i v6.09, 8TRK2, 16SLI3
SMT: i3105 v1.73, i5210 v1.54, i5220 v2.65, i5230 v1.38, i5243 v1.97, i5264 v1.35, i6021 v1.40
lbeaver
Участник
 
Торренты: 0
Комментарии: 5
Раздал: 5.2 Гб
Скачал: 1.12 Гб
Ратио: None.
Сообщения: 51
Зарегистрирован: 10 янв 2012, 13:06
Квалификация: Системный администратор
Организация: Энергия Юга

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение LionB 04 авг 2014, 15:46

Напиши спевайзеру, чтобы он продублировал этот торрент сюда http://forum.officeats.ru/viewforum.php?f=241
LionB
Модератор
 
Торренты: 0
Комментарии: 24
Раздал: 83.96 Мб
Скачал: 41.92 Мб
Ратио: None.
Сообщения: 6528
Зарегистрирован: 04 апр 2008, 09:28

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение Wi$e 06 авг 2014, 14:55

выложил
Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.25 Гб
Скачал: 2.29 Гб
Ратио: 86.528
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение bomsh 16 сен 2014, 09:34

А DM v4.80 совместим с прошивкой 4.75?
bomsh
Участник
 
Торренты: 0
Комментарии: 5
Раздал: 0 байт
Скачал: 19.19 Мб
Ратио: None.
Сообщения: 82
Зарегистрирован: 22 фев 2014, 09:46
Откуда: Minsk
Квалификация: Системный администратор
Организация: государственная

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение Wi$e 16 сен 2014, 20:15

да
Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.25 Гб
Скачал: 2.29 Гб
Ратио: 86.528
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Re: Прошивка OfficeServ 7400 MP40 v4.80 2014.06.05

Сообщение bomsh 22 сен 2014, 13:00

Wi$e писал(а):да

А у меня нет. :( osdm.jar
bomsh
Участник
 
Торренты: 0
Комментарии: 5
Раздал: 0 байт
Скачал: 19.19 Мб
Ратио: None.
Сообщения: 82
Зарегистрирован: 22 фев 2014, 09:46
Откуда: Minsk
Квалификация: Системный администратор
Организация: государственная


Вернуться в Officeserv7400 ROMS

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2


Продажа, установка и сервис IP-АТС NEC: SL1000, SV9100, SV9300, SV8100, SV8300, SV9500, SV8500



Пириногвые IP-АТС Symway. Консультация, Поставка, Внедрение.