Продажа, установка и сервис IP-АТС Ericsson-LG: iPECS eMG80, eMG800, UCP, LIK, MG, CM, Aria SOHO

SCME SW DISC IMAGE v5.1.0.5 20140925

ПО и Патчи для Samsung Communication Manager Express

Модератор: TOPPEHTEP

Правила форума
Возможность загрузки файлов доступна интеграторам и корпоративным клиентам!
По вопросам поддержки и доступа Вы можете обратиться:
- На электронную почту: Samsung@OfficeATS.ru
- По телефону: +7 (499) 653-71-72

SCME SW DISC IMAGE v5.1.0.5 20140925

Сообщение Wi$e 20 окт 2014, 20:44

Установочный диск (имидж) с ПО сервера IP платформы Samsung Communication Manager, версия 5.1.0.5 20140925.

New Version 5.1.0.x Changes:
V5.1.0.5
< Installation Cautions !>

1. After SCME installation, ACL feature is operated.
- IP for PC admin change to Data Link(eth0) IP band.
- In setup wizard, If KT TELECOM option is diable, ACL feature is not operated.
- Or [MANAGEMENT] -> [Access Control List] -> [ACL Options] -> [Miscellaneous ACL Status] -> disable.

< Upgrade Cautions !>

1. After SCME upgrade, Miscellaneous-ACL feature is operated.
- If you want to disable, [MANAGEMENT] -> [Access Control List] -> [ACL Options] -> [Miscellaneous ACL Status] -> disable.

1. [-/-/-] SCME sever Virtualization
- SCME system can run on a virtual machine.

2. [-/-/-] Added ACL features.
- In configuration wizard, if KT TELECOM option is enabled, ACL feature is operated.
- Korea only.

3. [-/-/-]CDR Hot Billing
- SCM will send the CDR data saved in the SCM at a time to CDR server after CDR server re-connect to SCM (In old version, SCM periodically sent CDR data of a cetain size to CDR server)

4. [-/-/-] ‘CDR Format’ Option changed.
- [ MANAGEMENT > CDR Storage Options > CDR Option ] CDR Format.
. OLD(Field Count 27)
. Ver2(Field Count 38)
. Ver3(Field Count 50)

5. [-/-/-] Added Options for IP Phone.
- In [ CONFIGURATION > Phone Setting > Service Options ] menu.
. ‘Premium CID Type’ added ‘Internal(by CallInfo)’option
. Added ‘Hotspot Channel(Country)’ for Wifi Module in a phone.
. Added ‘Phone Wallpaper’ and ‘Phone Ring’
 Upload file to SCM through the [ CONFIGURATION > Phone Setting >File Upload] menu.
- In [ CONFIGURATION > Phone Setting > SIP Options ] menu.
. Added ‘TOS(for WiFi)’

6. [-/-/-]In SCM Administrator, Single Phone User menu was changed.
- Option fields in Single Phone User menu are divided as follows:
: Basic Configuration, Protocol, Number Translation, Service, Interworking, Phone
- Create dialog is same with Change dialog.
- Each sub menus are displayed in tab dialog and user can input simply Basic Configuration when create a single phone user.

7. [-/-/-]In SCM Administrator, User menus has filter for Department, Position and Name.
- Department, Position and Name filter was added in Single Phone User, Multi-Phone User and User Profile menu.

8. [-/-/-]In SCM Administrator, MAC address type was changed.
- User can input MAC address without ‘:’ in Single Phone User, Multi-Extension Phone, AOM and Gateway menu.
- User can input MAC address with ‘:’ or ‘-‘.

9. [-/-/Russia]In SCM Administrator, the fixed version will be displayed in About dialog. (Russia only)
- The fixed version will be displayed in About dialog as follows: 5.1.0.0 (2014.08.19) V1.0
- It’s for Russia only.

10. [-/-/-]In SCM Administrator, Phone Tone of system unique option in old version can be inputted by country. SIP Phone is provisioned tone of system country.

11. [-/-/USA]Personal Assistant will check class of service when user create meet-me conference.
- If the user have no class of service for meet-me conference, the [Create] button will be deactivated.

12. [-/-/USA]In SCM Administrator, user can input Dial Number for meet-me conference.
- User can input Dial Number by User Group in [Conference > System Setting > Dial Number].
- When user create meet-me conference, the dial number will be displayed in Sending E-mail dialog.

13. [-/-/Italy]In Personal Assistant, Italian was updated.
- There was some English sentences in Italian mode, it was updated.

14. [-/-/Peru] Save the Authorize code to CDR.
- when call connects successfully, SCM will save the Authorize code to CDR.

15. [-/-/Peru] Added Display Option for Account Code and Authorize code.
- In [MANAGEMENT > CDR Storage Options > User Group CDR Option] menu.
'Display DTMF Detection Code' - set whether to save Account Code and Authorize Code to CDR.

16. [-/-/Australia] Save the Operator Group and Hunt Group Member Number to CDR.
- when call connects successfully, SCM will save the Operator Group and Hunt Group Member Number to CDR.

17. [-/-/USA] Added CID option for Semi-Blind Transfer to VM/AA
- In [CONFIGURATION > User Group > Change User Group > Options]
'Transfer CID for VM/AA' - set whether to display Transferer or Transferee CID to VM/AA.

18. [-/-/CHINA] Added Trunk Redial feature.
- When subscriber uses this feature is trying trunk call, SCM will attempt to redial the call by adding a 0 to the dialed number.
- This is CHINA only.

19. . [-/-/Korea] Hunt member is not connected after upgrading to V4.1.4.5
Since V4.1, hunt call is released if [No Answer Time] of Hunt Group is 0.
This is restored to the original state which is that [No Answer Time] of user group is working if [No Answer Time] of hunt group is 0 or null.

20. [-/-/AUS] SASEB Kill
The problem which is SASEB is killed when Call Move is answered and is released by peer at the same time is fixed.

21. [-/-/-] When FMC phone makes a call, the DID number of peer is delivered to FMC phone to make a call with it even tough FMC is placed out of wifi zone.
DID number is stored in call log.

22. [-/-/-]Multiple registrations to one ISP with one IP address is supported.
The incoming route is determined by matching a called number to [User Number Range].
To express a range of called number 'digits', '[ - ]' and 'X' can be used.
ex) 031279[1-3]XXX: number range which is 7 length digits starting with 0312791, 0312792, 0312793 (0312791000~0312793999)

23. [-/-/-]Supplementary information are added to CDR.
- Transferor
- Service Type(Pickup, Forward, Multiring, Hunt, Operator, ACD, SmartRouting, Handover)

24. [-/-/-]Display Column in ‘Call Management’ Menu is added.
- Calling Name/Called Name Column in [PERFORMANCE > Call Management] Menu

25. [-/-/-] Hotspot Option Menu is Added
- ‘Hotspot Channel’ Option in [CONFIGURATION > User Single Phone User > Phone Tab] Menu

26. [-/-/-]‘Parent Department display Option’ in Directory Service on Phone is Added
- ‘Search Parent in Directory Service’ Option in [CONFIGURATION > User Group> Department] Menu
- ‘Top Department in Directory Service’ Option in [CONFIGURATION > User >User Profile] Menu

27. [-/-/China][SCM Administrator] Two menus are added in Customer Data Import/Export.
- ‘Number Translation’ was added.
- ‘Click to Dial Callee Number Translation’ was added.

28. [-/-/-]In SCM Administrator, Listbox type was changed.
- When user input search string, items contain the string will be remained in right listbox.
- User can move items at one time with Left All and Right All button. (<<, >>)

29. [-/-/-][SCM Administrator] The change and create dialog of Multi-Extension Phone/Multi-Phone User menu was unified.
- [CONFIGURATION > User > Multi-Extension Phone]
- [CONFIGURATION > User > Multi- Phone User]
- The items are divided into tab form by subclass.

30. [-/-/Korea] Phone Registration by Type menus was added.
- [PERFORMANCE > Statistics > Phone Registration by Type > Registration Average]
- The statistics of registration average is displayed by phone type

31. [-/-/Korea] Input range of Send CLI Name was changed in user menu.
- User can input 20 characters not 20 digits for Send CLI Name in Single Phone User and Multi-Phone User.

32. [-/-/Korea] Added the Outside Work Restriction Policy Feature.
- When user used WeVoIP phone and are moved to external network from internal network, Outside-Work-Restriction -Policy is working during configured duration.
- [CONFIGURATION > User Group > Change User Group > Options> Check iOS Access Network] => iOS Only
- [CONFIGURATION > User Group > Change User Group > Timers>Push Reg-Request Interval(min) ] => iOS Only
- [CONFIGURATION > User > Single Phone User/Multi-Phone User> Service Tab >Outside Work Duration(hour)]
- [CONFIGURATION > Service > Feature Service > Class of Service>Outside Work Restriction Policy]

33. [-/-/Korea] added function that send ‘Database Backup File’ to FTP server
- Refer to [MANAGEMENT > Database > Database Backup]..

34. [-/-/-] Outbound Call History Feature Added.
- SCM provides Outbound Call History Feature like Incoming Call History.

35. [-/-/Korea] Disk usage statistics menu was added.
- [PERFORMANCE > Statistics > Resource > Disk]
- The statistics of disk usage is displayed

36. [-/-/Korea] Conference Member Eject Feature is added.
- Conference owner or a user which setup the conference can delete other user joined the conference.
- Dial with ‘Conference Member Eject Feature Code + a user to delete’.

37. [-/-/Korea] OS7500/OS7600 can be over-worked when the GW sends a REGISTER message with FXS list in body for multiple FXS registrations. This problem is solved. .


New Version 5.0.1.x Changes:
V5.0.1.5
< Downgrade Cautions! >

1. Operator should be executed downgrade process using console.
2. Operator should be executed ‘ssl_ssh_ntp_downgrade.sh’ in 5.0.1.4 package after running a uninstall script.

1. The bug of count: 0 about Evaluation License’s Samsung SIP Phones was fixed.
- [CONFIGURATION > Miscellaneous > License]
- Fixed the value about Evaluation License’s Samsung SIP Phones
(=Maximum Subscriber – (Samsung Soft Phones ~ 3rd PartySIP Phones)
2. [-/-/-] In Hunt Group and Pickup Group, you can search the group including partial name
- [CONFIGURATION > Service > Group Service > Hunt Group]
- [CONFIGURATION > Service > Group Service > Pickup Group]
- In Search, the group including name filter’s text will be displayed
3. [-/-/-] Added the [Service Group] in Registration Status menu.
- [PERFORMANCE > Registration Status > Registration Status ]
- Added the [Service Group] to filter and item
4. [-/-/-] Display the toolbar caption in AdministratorTool
5. [-/-/-] Added the [Hunt Group Name] and [Pickup Group Name] in user page
- [CONFIGURATION > User > Single Phone User]
- [CONFIGURATION > User > Multi-Phone User]
- Added the items of [Hunt Group Name] and [Pickup Group Name]
6. [-/-/-] Deleted the [3rd-Party SIP Trunk Channel] in Activation License
- [CONFIGURATION > Miscellaneous > Activation Key]
- Deleted the item of [3rd-Party SIP Trunk Channel]
7. [-/-/-] After displaying the alarm pop-up, it will be shut down automatically when the alarm is cleared
- [PERFORMANCE > Fault > Setting > Setting-Alarm]
- In Setting-Alarm, added the value of [Enable (Auto Close)] to Pop-up Flag
- When alarm is cleared, the alarm that this option is set will be shut down automatically
8. [-/-/-] Added the menu of [Close All Alarm Pop-up]
- [Menu Bar > Dialog]
- When alarm pop-up exists, in ‘Dialog’ menu, [Close All Alarm Pop-up] will be displayed. If clicked it, the all alarm pop-up will be shut down
- When there is no alarm pop-up, [Close All Alarm Pop-up] menu will be removed in ‘Dialog’ menu
9. [-/-/-] Encryption of passwords for registering phone
- The Profile Password and Authentication Password in User menus will be encrypted.
(AES, Base64 Encoding)
10. [-/-/-] Added the menu of [User Service State]
- [Configuration > User > User Service State]
- The service state of users like as call forward will be displayed.
(User Group, Service Group, Department, Extension Number, IP Address, Regi State, Hunt Group, Pickup Group, Call Forward, Group Call Forward)
11. [-/-/-] Added COS about push service enable or disable according to access network.
- [Configuration > Service > Feature Service > Class Of Service]
: Internal Wi-Fi Push Service, Hotspot Push Service, mVoIP Push Service
- This feature is correctly working at adroid FMC client
12. [-/-/KOREA] Next Destination of Hunt Group Issue.
- Next Destination of Hunt Group is not working when Incoming call is from Operator Group.
- This issue is fixed in this package.
13. [-/-/Australia] Deleted a 3rd-Party SIP Trunk Channel License Function.
14. [-/-/SEG] Abnormal Block State(CSB.exe).
- If System Speed Dial is configured to Next Destination of ACD, CSB.exe is killed when working.
- This issue is fixed in this package.
15.[-/-/-] Call Move feature is improved.
- If a first call of FMC user is released by answering a 3G call, the peer is not connected to MOH.
- In V5.0.1, moving call to 3G can be released.
16.[-/-/-] Nurse Call feature is added.
- SCME can be interworking with Nurse Call System via OS7500.
- SCME parses the called number to get Room and Bed number for a nurse call and the Room and Bed number is used for calling CID.
17. [-/-/-] Premium CID is expanded to a trunk call from a mobilephone of a user.
- If a calling CID of a trunk call is same to the mobilephone number of SCME user, SCME provides the premium CID of the user to the peer.
18.[-/-/-] Voice Quality Report Configuration Menu is added.
- Select whether to report the Mobile Phone’s Voice Quality Information to System
- Refer to ‘Voice Quality Report’ Option in [Configuration > Wireless Enterprise > Mobile Phone Profile]menu
19. [-/-/-]Add a Type Option of User Profile Field.
- Can specify attribute of Name Field.(used for Terminal)
- Refer to ‘Type’ Option in [Configuration > User Group >User Profile Field Name]menu
20. [-/-/-] International Call Forward / Call Transfer block service is added.
- By using international call prefix, operator can block a call forward or call transfer service.
- Refer to[Configuration > User Group >Change User Group > International call prefix]menu.
21. [-/-/-] International Call Inform feature is added.
- By using international call prefix, operator can receive international call attempt count.
- Refer to[Configuration > User Group >Change User Group > International call prefix]menu.
- Refer to ‘International Call Check Count’ and ‘International Call Check Duration(minute)’ in [Configuration >Miscellaneous> System options] menu.
22. [-/-/KOREA] Wrong called number display in [Call Management] menu is fixed when hunt call is failed.
23. [-/-/MIA] Long Duration Call caused by call release fail is fixed.

24. [-/-/-]FMCoptions are added
- [CONFIGURATION > User Group > Change User Group > Options]
‘Photo Size in Premium CID’ option is added.
- [CONFIGURATION > User > User Profile]
‘Priority in Same Position’ option is added.
- [CONFIGURATION > Miscellaneous > System Options]
‘LDAP-Display Number Option’ option is added.
- [CONFIGURATION > User Group >User Profile Field Name]
‘Display On Phone’ option is added.


5
0
Голосов нет
4
0
Голосов нет
3
0
Голосов нет
2
0
Голосов нет
1
0
Голосов нет
 
Всего голосов : 0

Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.27 Гб
Скачал: 2.29 Гб
Ратио: 86.537
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Вернуться в SCME Software & Patches

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2


Продажа, установка и сервис IP-АТС Ericsson-LG: iPECS eMG80, eMG800, UCP, LIK, MG, CM, Aria SOHO



Пириногвые IP-АТС Symway. Консультация, Поставка, Внедрение.
cron