Установка и Настройка АТС

SCME SW PATCH v5.4.2.6 20151222

ПО и Патчи для Samsung Communication Manager Express

Модератор: TOPPEHTEP

Правила форума
Возможность загрузки файлов доступна интеграторам и корпоративным клиентам!
По вопросам поддержки и доступа Вы можете обратиться:
- На электронную почту: Samsung@OfficeATS.ru
- По телефону: +7 (499) 653-71-72

SCME SW PATCH v5.4.2.6 20151222

Сообщение Wi$e 18 янв 2016, 21:13

Обновление ОС для сервера IP платформы Samsung Communication Manager (SCMe), версия 5.4.2.6 20151222.

Notes
1) Before upgrade the SCME software to V5.4.2.6, please read the “Cautions” on the release note carefully. (Item #13 and #17)
Especially, new APNS certification file is included in V5.4.2.6, which is compatible with iOS WE VoIP V2.2.0.
The latest iOS WE VoIP V2.1.9 or older versions are not compatible with new APNS certification file included in V5.4.2.6.
Therefore, when SCME V5.4.2.6 is installed, iOS WE VoIP V2.2.0 should also be installed together
.
2) Most of bugs were fixed in this package, which were reported since V5.4.0.9 was released.
3) SMT-i60xx and new Gateway (G500) are fully compatible.

New Version 5.4.2.x Changes:
V5.4.2.6
1. [-/-/KOREA]Multicast Paging. Phone Version needs to be checked to support this feature.

2. [-/-/KOREA] WE VoIP Conference Recording. It needs to check WE VoIP Version.

3. [-/-/KOREA]Tandem Call CDR Feature is added.
This feature provides representation number to charging for tandem call.
“Tandem Representation Number” in [CONFIGURATION > Trunk Routing > Route] – {Number Translation} menu.

4. [-/-/KOREA] Trunk Diversion Number Feature has been improved.
The feature was improved so that providing a service simultaneously to subscriber and the trunk.

5. [-/-/KOREA] add the options for Handover Service by Mobile.
- Mode of Handover service by Mobile phone is added
- RTP Quality Option for handover is added
- Edge AP List Option is added
- Private Registrar IP/Port Option for Mobile Phone in private Wi-Fi zone is added

6. [-/-/KOREA] URL for mobile phone package server is added

7. [-/-/KOREA] Added feature that displays access network of the mobile phone in conversion
SCM provides Mobile Phone Access Network for WE VoIP User.

8. [-/-/KOREA] Added the function that provide access network of the mobile phone while using WE VoIP Pro

9. [-/-/KOREA] (Korea only) WE VoIP Package Upload feature is added in [CONFIGURATION > Phone Setting > File Upload] menu.

10. [-/-/-] Intercom Voice Only feature is added.
When a call is established between video phones via Intercom, administrator can choose whether the call is supported video streams or not.

11. [-/-/USA] Trunk Auto Answer Ignore feature is added.
Auto Answer which is set to a user can be ignored when a call from a trunk is received to the user by the option.

12. [-/-/USA] When an emergency group call is requested, the SCM dials the emergency number and emergency manager numbers simultaneously.

13. [-/-/KOREA] Active-Active IP and Active-Standby IP is inserted to [MANAGEMENT > Access Control List(ACL) > Management Port ACL] menu automatically.
Index 49 is reserved for Active-Active IP and index 50 is reserved for Active-Standby IP in [MANAGEMENT > Access Control List(ACL) > Management Port ACL] menu..
If there are some IP address on index 49~50, please move to the other index before upgrading to V5.4.2.x package.

14. [-/-/AUS] Can input Domain string for NTP Second Server and NTP Public Second Server in [Configuration > Phone Setting > NTP Options].

15. [-/-/AUS] Package Installation and Upgrade Check Feature has been added.
SCM checks a duplicated installation and non-installation during package installation and upgrade.

16. [-/-/AUS] Management ACL Feature has been improved. TCP 80 and 443 is not blocked when Management ACL is activated in [MANAGEMENT > Access Control List(ACL) > ACL Options] menu.

17. [-/-/-] APNs Certification Files was changed for supporting new iOS WE VoIP.
CAUTION: WE VoIP of V2.2.0 version for iOS (8.1) can’t be used in SCM Express (V5.4.2.x). Please upgrade to iOS WE VoIP of V2.2.0 version. The expiration date of the certification is 2016.12.2.

18. [-/-/KOREA] added configuration options for IP Phone.
- Use Headset Button
- WEB Access
- Use PC-VLAN

19. [-/-/-] Activation Key changing method has been improved. Quantity of input possible Activation Key has been extended (2 -> 4).
[Activation Key Changing Method]
- Input New Activation Keys
- Delete Old Activation Keys

20. [-/-/-] FAX Relay (Inter-Gateway) type was added to [CONFIGURATION > Gateway > IPX Setting > Gateway Configuration] menu. This filed is used for sending fax between gateway

21. [-/-/KOREA] add the secure protocol type for IPX Gateway.

22. [-/-/-] EHS Headset option value names were changed.
The option value in [CONFIGURATION > User > Single Phone User / Multi-Phone User > Phone > EHS Headset] was changed from Disable/Enable to Normal/Advanced for better understanding.

23. [-/-/-] “Login Override” option was removed [Configuration > Single Phone User, Multi-Extension Phone > Phone] menu. (Not used option)

24. [-/-/-] Broad Message PUSH resending functionality added
SCM can be configured to resend broad message PUSH at /DI/CM/config/com/BMESSAGE_CONFIG.ini
SCM resend the push message when We VoIP does not read the broad message.

25. [-/-/KOREA] added function that check the duplication of system internal DB account and CMS DB account.

26. [-/-/KOREA] Fixed : Member Party in Room Information menu is not displayed.
Fixed the problem that the value in [CONFIGURATION > Service > Hotel Service > Room Information > Member Party] menu is not displayed.

27. [-/-/KOREA] problem with PMS is fixed.
- Deactivate the service of Room Phone when room check in.
- Fixed the CDR report delay problem
- Release the trunk call when room check out.

28. [-/-/KOREA] fixed the problem that system don’t send reboot message to IP Phone when system switch over Active-Active.

29. [-/-/Turkey] Transfer INVITE Direction feature has been fixed.
When Transfer INVITE Direction Option is “Extension First”, sending INVITE message to transferee has been solved.

30. [-/-/KOREA] In case of Multi-Phone user, Always Allow option was not working. This problem has been fixed so that with Always Allow option, other members are ringing when the master is busy.

31. [-/-/KOREA] fixed the problem that system don’t send the message for profile update to IP Phone when multi extension phone configuration is changed.

32. [-/-/KOREA] fixed the problem that can’t set the morning call

33. [-/-/KOREA] Fixed : If the extension number includes ‘*’, creating Person SPAM Number fails.

34. [-/-/RUSSIA] fixed the problem that can’t login SCM Administrator when upgraded from previous version of 5.2.1 to next version of 5.2.1

35. [-/-/USA] fixed the problem that can’t delete automatically User Profile of Operator Group Access Code ‘0’ by Configuration Wizard.

36. [-/-/KOREA] fixed the problem that can’t change ACD Group member when ACD Group member count is over 100 agents.

37. [-/-/AUS] Fixed that Customer Data Import/Export dialog of SCM Administrator is not popped-up when java is updated to 8u65.

38. [-/-/AUS] Priority Codec/Forced Codec policy is applied to the re-INVITE for Hold and Transfer

39. [-/-/KOREA] fixed the problem that system don’t synchronize the attached file of notice board

New Version 5.4.1.x Changes:
V5.4.1.3
1. [-/-/KOREA]add FMC site profile menu.
Block: DMB,PDMB

2. [-/-/KOREA]change the initial value of SIP public port and FMC Rx Port.
Block:DMB

3. [-/-/KOREA]add PMS function – mini-bar report and PMS HA-mode.
Block: DMB, PMSB

4. [-/-/KOREA]fixed PMS function problem(alarm, cdr, creation of Group)
Block: DMB, PMSB

5. [-/-/-]add function for new IPX-G500 gateway product.
Block: DMB, GWMB

6. [-/-/-]fixed problem for No-Ring service of multi-type phone.
Block: DMB

7. [-/-/-]fixed problem for absence service activation.
Block: DMB

8. [-/-/KOREA]Selective No Ring feature for Multi-Device and Multi-Line is added. Selective No Ring means that No Ring service is applied by the comparison with Override level of caller and Privacy level of callee.
Block: CSB

9. [-/-/KOREA]When SBC returns error code before ringing for smart routing call, SCM provides a connection service using mobile number.
Block: CSB


5
0
Голосов нет
4
0
Голосов нет
3
0
Голосов нет
2
0
Голосов нет
1
0
Голосов нет
 
Всего голосов : 0

Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.25 Гб
Скачал: 2.29 Гб
Ратио: 86.528
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Вернуться в SCME Software & Patches

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 0


Продажа, установка и сервис IP-АТС NEC: SL1000, SV9100, SV9300, SV8100, SV8300, SV9500, SV8500



Пириногвые IP-АТС Symway. Консультация, Поставка, Внедрение.