Продажа IP телефонов Yealink по выгодным ценам

Прошивка OfficeServ 7070 v4.99 20160930

Прошивки для АТС Samsung OfficeServ7070.

Модератор: TOPPEHTEP

Правила форума
Возможность загрузки файлов доступна интеграторам и корпоративным клиентам!
По вопросам поддержки и доступа Вы можете обратиться:
- На электронную почту: Samsung@OfficeATS.ru
- По телефону: +7 (499) 653-71-72

Прошивка OfficeServ 7070 v4.99 20160930

Сообщение Wi$e 07 окт 2016, 17:48

Прошивка для АТС Samsung OfficeServ 7070, версия v4.99 20160930.

New Version Changes
’16.09.30 V4.99
※ DB Compatibility
- The database of V4.99 is not compatible with that of a previous version including the V4.95, V4.94, V4.93
- So you download the database of the existing system before upgrading to V4.99 using DM.
- After upgrading to V4.99, upload the downloaded DB by DM.

※ All of changes are accumulatively applied to last version.

[New features]
1. [-/ALL/ ALL] system log files is deleted periodically.
<Description>
System log files including /var/log/wtmp, /var/run/utmp are deleted every 1 minute to prevent full of nand flash

2. [-/ALL/ALL] KMMC 900 CLEAR PASSCODE - ADM and KMMC 905 DEVICE TEST -COLSET DM ACL options are deleted for security
<Description>
KMMC 900 CLEAR PASSCODE - ADM and KMMC 905 DEVICE TEST - COLSET DM ACL options are deleted for security
<Alternative method>
If you want to know how to initialize DM password of Admin or DM ACL IP Lists, contact HQ

3. [-/ALL/ALL] telnet/web to MP is disabled for security
<Description>
Basically telnet/web to MP is disabled from V4.98/V4.99. But you can enable them in DM 5.2.10 System IP options – Protocol Enable – HTTP/TELNET
<Related Features>
If you want to use FMC Client, OSPP phonebook, DM download from MP features, you have to enable this option
<Caution>
In case of upload old version DB by using OfficeServ DM for upgrade to V4.99, this option is enabled.

4. [#TE16702L /ALL/ALL] add “Anonymous” display text in the From Header (Reported by USA)
<Description>
When making an anonymous call, there was no “Anonymous” display text in the from header.
“Anonymous” display text is added in this version.

5. [-/ALL/ALL] Upload embedded DM file by using DM.
<Description>
You weren’t able to upload embedded DM file by using DM at V4.98, This is changed to be able to upload it from V4.99.


[Bug Fix]
1. [#TE16706U /ALL/ALL] send SIP 200 OK including ‘sendonly’. (Reported by UK)
<Description>
When receiving reINVITE including session level ‘sendonly’, OfficeServ sent 200 OK including ‘sendrecv’ instead of ‘sendonly’. This is fixed.

2. [-/ALL/ALL] Email gateway delivery fails when domain name is set for SMTP server. It’s fixed. (Reported by: Chile)
<Description>
Email gateway delivery often failed when domain name is set for SMTP server because it does not verify the IP address returned by DNS server.
This bug is included since 2015. Previous version software does not have this issue.

3. [#TE16603C/ALL/ALL] DTMF administrator will not be able to create more than 6 digit subscriber. (Reported by: Australia)
<Description>
If a hacker can access DTMF administrator, he can make a long distance call although the outcall authorization is off.
The hacker can make long digits extension and he makes a call to transfer to that extension, SVMi will make a long distance call.
So, It’s changed that DTMF administrator will not be able to create subscriber that has more than 6 digits. To create long digits subscribers, you have to use DM

4. [#TE16600T/ FPGA version 16DLI2 Card on MP20S,MP10A/ALL] DGP speaker open issue is fixed. (Reported by USA)
<Description>
If you use FPGA version 16DLI2 Card, it’s possible to send speaker on message to DGP during conversion. This issue is fixed.

5. [-/ALL/ALL] The time of going to idle state after user disconnects a call and keep hook-off is changed
<Description>
The time of going to idle state after user disconnects a call and keep hook-off is changed from 1 minute to 3 minutes. If you answer a new call by using button after this time, both handset and speaker are opened at the same time.
* This time was changed from 3 minutes to 1 minute at V4.91

6. [#TE16803H, #TE16404F/ALL/ALL] Incorrect call duration time of SMDR is fixed. (Reported by UK and Holland)
<Description>
Incorrect call duration time of SMDR is fixed at 2 cases as below
- After setting absent message by using jog shuttle of IP phone
- After UCD group in/out by UCD supervisor

7. [#TE16902I/ ALL/ALL] Issue retrieving calls from Park is fixed. (Reported by UK)
<Description>
if you have parked an incoming call when the DS phones have another incoming call you cannot retrieve the parked call while the incoming call is ringing. This issue is fixed.

8. [-/OS7070/ALL] Management IP White List Problem is fixed.
<Description>
Intermittently Management IP White List feature didn’t work correctly on OS7070. This is fixed.

9. [#TE16803P/MP40,MP20/ALL] ‘SIP Register Per User fails’ Issue is fixed. (Reported by Australia
<Description>
In case of using SIP Register Per User feature (DM 5.2.14) at V4.98, SIP registrations are failed. This issue is fixed.

’16.08.01 V4.98
※ DB Compatibility
※ - The database of V4.98 is not compatible with that of a previous version including the V4.92
※ - So you download the database of the existing system before upgrading to V4.98 using DM.
※ - After upgrading to V4.98, upload the downloaded DB by DM.

[New features]
10. [-/ALL/ USA] 911 CID number to PRI trunk can be modified. (Requested by USA)
<Description>
You can modify 911 emergency CID number
DM 2.1.5 System Options - Emergency CID Table Number is added and this means table number of ‘DM 2.4.3 Send CLI Number’

11. [-/ALL/ALL] telnet/web to MP is disabled for security
<Description>
Basically telnet/web to MP is disabled from V4.98. But you can enable them in DM 5.2.10 System IP options – Protocol Enable – HTTP/TELNET
<Related Features>
If you want to use FMC Client, OSPP phonebook, DM download from MP features, you have to enable this option

12. [-/ALL/ALL] telnet/ftp to SVMi-20i is disabled for security
<Description>
Basically telnet/web in SVMi-20i is disabled from V4.98. But you can enable them in DM 5.2.10 System IP options – SVMi Enable –TELNET/FTP
<Related Features>
If you want to use some options as below, you have to enable this option
DM 8.6.1 Voice Studio
DM 8.7.1~3 User, Error, Activity log
DM 8.7.5 Subscriber import
DM 8.7.6 Backup and Restore

13. [-/ALL/ALL] IP white List for telnet/ftp in SVMi-20i is applied for security
<Description>
IP white List for telnet/ftp in SVMi-20i is applied. You can set it in DM 5.13.11 Management IP White List

14. [-/ALL/ALL] SIP phone user can Set or Cancel Message to extension excluding SIP phone. (Requested by USA)
<Description>
SIP phone user can Set or Clear message to extension except for SIP phone or MSG group.
SIP Phone user can dial SETMG or CANMG feature code + extension number.
SIP Phone user can dial SETMG or CANMG feature code + MSG group number.

15. [#TE16403Z/ ALL/ALL] ‘Send 20ms ptime’ feature (Requested by UK)
<Description>
You can set ‘Send 20ms ptime’ feature in DM 5.2.12 SIP Stack/Ext/Trunk Options .- SIP Trunk Configuration – Send 20ms ptime
If you set this option, all of frame count in OfficeServ set to 20ms.
And 20ms ptime is added in SIP SDP message.

16. [-/ALL/ALL] OAS Card Network Error Recovery
<Description>
In case that network between MP Card and OAS card is disconnected for 2 minutes, MP reboot OAS Card automatically for network link recovery.


[Bug Fix]
1. [-/ALL/ALL] LCR reroute failure when DNS Query for SIP trunk is failed (Reported by Australia)
<Description>
Set 1st LCR trunk to SIP trunk and 2nd LCR trunk to PRI trunk or other trunk. Set outbound proxy to URL and set DNS Server to IP address.
In case of DNS Query for SIP Trunk is failed, LCR call cannot reroute 2nd trunk.
<Cause>
DNS Query failure was not considered for LCR reroute.
<Resolution>
In case of DNS Query for SIP Trunk is failed, LCR call can reroute to 2nd trunk.

2. [#TE16404E/ALL/ALL] There is a one-way speech when uncondition station group call from trunk overflows to sip phone in uncondition station group including 2 sip phones or more. (Reported by UK)
<Description>
There is one-way speech when uncondition station group call from trunk overflows to sip phone in uncondition station group including 2 sip phones or more.
<Cause>
In this case, common MGI channel for sip phone in uncondition station group is released.
<Resolution>
Fixed releasing common MGI channel for sip phone in uncondition station group

3. [#TE164004/ALL/ALL] There is a call drop when receiving ‘480 temporarily unavailable’ message from SIP phone in uncondition station group. (Reported by Italy)
<Description>
You make a call to uncondition station group including sip phone and sip phone send ‘480 temporarily unavailable’ message. Then this call is dropped.
<Cause>
In case that sip phone in uncondition station group send ‘480 temporarily unavailable’ message. There is a call control error.
<Resolution>
You make a call to uncondition station group including sip phone and sip phone send ‘480 temporarily unavailable’ message. Then this call continue and other phones are ringing.

4. [#TE16603L/ALL/ALL] Allowing RFC2833 payload type 101 (Reported by South Africa)
<Description>
When voice mail receive 96 telephone-event in SIP SDP, OfficeServ only allow rtpevent including payload type 96.
In case that SIP service provider send 96 telephone-event in SIP SDP and rtpevent including payload type 101, OfficeServ don’t detect rtpevent including payload type 101
<Cause>
This is modification of V4.92 for particular SIP service provider.
<Resolution>
Do not support RFC2833 rtpevent including payload type 96.

5. [-/ALL/ALL] Intermittent message loss from MP to OAS (Reported by Australia/UK)
<Description>
There is a possibility of intermittent message loss from MP to OAS
<Cause>
There is a possibility of intermittent message loss from MP to OAS when MP send message to OAS and OAS send message to OAS at the same time.
<Resolution>
Re-transmission scheme is added.

6. [-/ALL/ALL] Distorted ringback tone ((Reported by UK)
<Description>
A SIP Trunk incoming call go to SIP trunk (tandem). In this condition, OfficeServ receives 183 and 180 at once. And call originator can listen distorted ringback tone
<Cause>
A SIP Trunk incoming call go to SIP trunk (tandem). When OfficeServ receives 183 and 180 at once. OfficeServ send 183 and 180 to SIP trunk.and send 2 RTP stream from MPS and RTG. This can make distorted ringback tone at call originate side.
<Resolution>
In this case, OfficeServ don’t handle 180 w/o SDP after 183 w/ SDP or 180 w/. This means OfficeServ only send 1 RTP stream from MPS to SIP Trunk (call originator).

7. [-/ALL/Russia] DS button display of SDM is wrong in Russian (Reported by Russia)
<Description>
DS button display of SDM is wrong in Russian.
<Cause>
DS button display of SDM is wrong in Russian.
<Resolution>
Change Russian character. .

8. [-/ALL/ALL] DSS key for 3rd party SIP extn locks up the keyset. (Reported by Australia)
<Description>
Incoming ISDN call goes to SIP extension and other phone pick up the call using DSS key.
After that, SIP extension locks up.
<Cause>
In this case, there is an error of call control.
<Resolution>
An error of call control is fixed.

9. [-/ALL/ALL] No transfer tone after hunt time timed out. (Reported by Australia)
<Description>
Set DM 5.14.1 Transfer Ring Back MOH to On
Make a SIP Trunk call and talk to each other. Transfer the call to hunt group.
There is no transfer tone after hunt time timed out.
<Cause>
In this case, RTP is released for transfer MOH
<Resolution>
In this case, RTP is used for transfer MOH continuously

10. [#TE16701K/ALL/ALL] Absent message in SMDR isn’t printed out when setting it from UC dial on SMT phone. (Reported by UK)
<Description>
Absent message in SMDR isn’t printed out when setting it from UC dial on SMT phone <Cause>
When setting absent message using UC dial on SMT phone, OfficeServ don’t send SMDR message.
<Resolution>
When setting absent message using UC dial on SMT phone, OfficeServ sends SMDR message.

11. [-/ALL/ALL] Intermittent DM connection lockup after receiving SNMP Get Bulk Message. (Reported by Korea)
<Description>
After receiving SNMP Get Bulk Message DM connection is failed.
<Cause>
There is an error of memory management when receiving SNMP Get Bulk Message..
<Resolution>
An error of memory management is fixed.

12. [#TE16703S/ALL/ALL] There is a one-way speech when using headset and speaker key on IP phone. (Reported by Australia)
<Description>
DM 2.1.5 System Options – VoIP RTP Option – SIPT Ringback Message set to 180. Incoming SIP Trunk call goes to IP phone which is set to headset mode. And IP phone answers the call by using speaker key. In this case, IP phone user gets one-way speech.
<Cause>
In this case, there is an error of t-switch control
<Resolution>
An error of t-switch control is fixed

13. [#TE164021/ALL/ALL] MPS don’t send packet to opponent. ((Reported by UK)
<Description>
MPS don’t send packet to opponent in a specific call scenario as below.
Incoming SIP trunk Call goes to uncondition station group including SIP phones. One SIP phone rejects the call and other phone picks up the call.
<Cause>
In this case, there is an error of MPS control
<Resolution>
An error of MPS control is fixed


’16.03.08 V4.95
※ DB Compatibility

※ The old s/w cannot recognize the new nand. If the old package is upgrade to the new system, the booting is failed. But The V4.95 s/w has a compatibility on the old and new system.

[Major Changes]
1. [-/OS7100/OS7200s/ALL] The New Nand Device id was added.
<Description>
NAND Die was changed. (D die → E die). The old version and the new system doesn't become a compatible. If the old package is upgrade to the new system, the booting is failed.

[Bug Fix]
14. [-/Linux/ALL] System restart after set DM 6.1.4 System Alarm Mail Server Info
<Description>
System restart after set Send Day and Send Major Alarm Immediately on DM 6.1.4 System Alarm Mail Server Info because of failure of socket control
<Cause>
In this case, there is a failure of tcp socket control
<Resolution>
checking tcp socket validation.

15. [-/ALL/ALL] ] Crosstalk issue or one way speech problem when transferred call is recalled to IP phone.
<Description>
IP phone which is a member of uncondition group member answers incoming uncondition group call and does a blind transfer to another phone. IP phone answers new incoming uncondition group call. Nobody answers the transferred call and the transferred call is recall. IP phone user finishes current call and answers the recalled call. In this case one way speech problem occurs. A crosstalk can be generated, because a used mgi channel can be allocated by the other port,.
<Cause>
In this case there is a MGI channel control error
<Resolution>
MGI channel control error is fixed.

16. [-/ALL/ALL] Average Call per week in 8.11 Status Screen is always 0.
<Description>
Average calls per week in DM 8.11 Status Screen is always 0.
<Cause>
The start time for this statistics is fixed to 2006. So total calls divided with a big number.
<Resolution>
Start time of reporting will be assigned with current time when SVMi-20i starts if the configuration(block table) is default.
<Ref>
We recommend to clear VM/AA report count with DM 8.7.7 when you install the system.

17. [-/ALL/ALL] If Registrar Address is set, Proxy Domain Name is not used at host name of REGISTER
<Description>
If Registrar Address is set, Proxy Domain Name is not used at host name of REGISTER (in DM 5.2.13)
<Cause>
A host name of REGISTER is filled with Registrar Address always although Proxy Domain Name is set
<Resolution>
If Proxy Domain Name is set, a host name of REGISTER is filled with Proxy Domain Name

18. [-/ALL/ALL] The DNS query was not working when setting the DNS server in DM5.2.13 SIP Carrier Options.
<Description>
In case DM 2.1.5 ‘Multi DNS Server’ option was enabled and the DNS server was changed, DNS Query was not working.
< Resolution >
If changed the DNS Server Address in DM 5.2.13, OfficeServ is rebooted automatically. The DNS query operation is working after system restart.

19. [-/MP20s/ALL] Not supporting the function detected the IP collision.
<Description>
We revise so that the related function doesn’t be supported in OS7200s
Because the issue which the capacity is related compared with MP10a can happen, MP20s deletes a function
< Resolution >
In order to confirm the IP collision by using the ping or the data equipment.


5
0
Голосов нет
4
0
Голосов нет
3
0
Голосов нет
2
0
Голосов нет
1
0
Голосов нет
 
Всего голосов : 0

Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.26 Гб
Скачал: 2.29 Гб
Ратио: 86.531
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Вернуться в Officeserv7070 ROMS

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2


Продажа, установка и сервис IP-АТС Ericsson-LG: iPECS eMG80, eMG800, UCP, LIK, MG, CM, Aria SOHO



Пириногвые IP-АТС Symway. Консультация, Поставка, Внедрение.
cron