Продажа, установка и сервис IP-АТС Panasonic: KX-NS500, KX-NS1000, KX-NCP, KX-TDE, KX-TDA

Прошивка OfficeServ7200 MP20 G53320170104 для SCME

Прошивки АТС OfficeServ серии 7000 для работы TDM шлюзами в составе Samsung Communication Manager Express.

Модератор: TOPPEHTEP

Правила форума
Возможность загрузки файлов доступна интеграторам и корпоративным клиентам!
По вопросам поддержки и доступа Вы можете обратиться:
- На электронную почту: Samsung@OfficeATS.ru
- По телефону: +7 (499) 653-71-72

Прошивка OfficeServ7200 MP20 G53320170104 для SCME

Сообщение Wi$e 12 янв 2018, 22:26

Прошивка процессора MP20 АТС Samsung OfficeServ 7200 для работы в составе IP платформы Samsung Communication Manager Express, версия G533 20170104.

New Version Changes
’17.01.04 G5.33
※ DB Compatibility
- The database of G5.33 is not compatible with that of a previous version.
- So you download the database of the existing system before upgrading to G5.33 using DM.
- After upgrading to G5.33 upload the downloaded DB by DM.

※ Cannot upload DM files(osdm.jar, osdmhelp.jar) by using OfficeServ DM
If you want to upload OfficeServ DM files to SD card, you have to copy them to SD card by using SD card reader on your PC.


[Security]
Enhanced security of OfficeServ GW as follows

1. [-/ALL/ALL] Upgraded openssl to version 1.0.1s
<Modified>
- OS7400,OS7200 : V1.0.1o-> V1.0.1s
- OS7100,OS7070 : V1.0.0 -> V1.0.1s

2. [-/OS7070/ALL] Applied TLS as SIP signal of OS7070

3. [-/ALL/ALL] Applied management IP white list used OfficeServ stand alone for security
<Modified>
Added DM 5.13.11 IP white list.
- Telnet/FTP access to MP is limited in case source IP address is excluded DM 5.13.11
- Telnet/FTP access to SVMi-20i is limited in case source IP address is excluded DM 5.13.11

4. [-/ALL/ALL] HTTP/Telnet of MP and Telnet/FTP of SVMi-20i are disabled for security
<Description>
Basically HTTP/Telnet of MP and Telnet/FTP of SVMi-20i are disabled for security. For these services you have to change options as follows to be enabled
<Modified>
- Added DM 5.2.10 System IP Options - Protocol Enable
: HTTP/Telnet of MP can be enabled
- Added DM 5.2.10 System IP Options - SVMi Enable
- : Telnet/FTP of SVMi-20i can be enabled

5. [-/ALL/ALL] Encrypted passwords are saved to memory.
<Modified>
Below passwords are saved to memory (RAM)
- SIP Phone Auth. Password (MMC842/ DM 2.7.2)
- TLS Encrypt private key password (MMC837/ DM 5.2.12)
- SIP Trunk Auth. Password (MMC837/ DM 5.2.13)
- SIP User Auth. Password (MMC839/ DM 5.2.14)
- SNMP Trap Server - Community Server (DM 5.13.8)

6. [-/ALL/ALL] Encrypted password between MP and OfficeServ DM for DM login is used.
<Modified>
Encrypted password between MP and OfficeServ DM for DM login is used
For DM login you MUST use Password Encryption as Encryption Type of DM.



Besides, below passwords of message between MP and OfficeServ DM are encrypted.
- SIP Phone Auth. Password (MMC842/ DM 2.7.2)
- TLS Encrypt private key password (MMC837/ DM 5.2.12)
- SIP Trunk Auth. Password (MMC837/ DM 5.2.13)
- SIP User Auth. Password (MMC839/ DM 5.2.14)
- SNMP Trap Server - Community Server (DM 5.13.8)

7. [-/ALL/ALL] Telnet of MGI16/64 and OAS is disabled for security
<Description>
Basically Telnet of MGI16/64 and OAS is disabled for security. For this telnet service you have to change options as follow to be enabled
This restriction is applied when using MGI16/64 V1.32, OAS V2.11 or more
<Modified>
DM 2.2.2 MGI Card - Telnet Use option is added
For using telnet of MGI or OAS you have to change Telnet Use option to be enabled.

8. [-/OS7400, OS7200/ALL] fixed DM access problem
<Issue>
DM access is failed after receiving a lot of SNMP Get Bulk Messages
<Reason>
There was a problem about memory management
<Modified>
Problem about memory management is fixed.


[Registration to SCM]
Fixed Problems about SIP register and TCP link connection

1. [-/ALL/ALL] random source port number of TCP link
<Issue>
It takes a long time (about 20 ~ 30 minutes) to register to SCM when many GW try to connect to SCM.
<Reason>
SCM denies TCP link connects from same source port.
<Modified>
OfficeServ GW try to connect TCP link by using random source port number (7000 ~ 65535)

2. [-/ALL/ALL] Fixed FXS registration failure after reconnecting representative registration
<Issue>
Registration status of FXS is changed to disconnect after disconnecting and reconnecting representative registration caused by temporary network failure.
<Reason>
Registration status of FXS is changed to disconnect after disconnecting and reconnecting representative registration caused by temporary network failure.
<Modified>
In this case, keeping the registration status of FXS

3. [-/ALL/ALL] Fixed FXS registration failure after A-A synchronization
<Issue>
In case of dual registration, one (Master) is registered and another is not registered. When master is disconnected and reconnected, FXS isn’t connected right after reconnecting master server.
<Reason>
In this case, FXS don’t try to register right after reconnecting master server.
<Modified>
In this case, FXS try to register right after reconnecting master server.

4. [-/ALL/ALL] Enhanced registration procedure to SCME A-A mode.
<Issue>
If SCME is A-A mode and TLS is used and the number of GW is 500 or more, registration between SCME and OfficeServ GW is unstable.
<Reason>
When a large number of registration messages come up to SCME in a short time, a delay of message processing occurs in SCM and OfficeServ GW performs a full re-registration due to this delay. As this procedure is repeated, registration becomes unstable.
<Modified>
Random re-registration time is applied.
Registration procedures are enhanced.


[Survival Mode]
Fixed Problems about survival mode

1. [-/ALL/ALL] fixed problem about deleting pickup group number of FXS for survival mode
<Issue>
SIP Phone information of SCM is changed when OfficeServ GW is survival mode.
After OfficeServ GW is changed from survival mode to normal mode OfficeServ GW receive message about changed SIP Phone information
In this case OfficeServ deleted pickup group number of FXS for survival mode
<Reason>
When receiving message about changed SIP Phone information, OfficeServ GW delete pickup group number of all user. And add pickup group number of SIP phone.
<Modified>
When receiving message about changed SIP Phone information, OfficeServ GW delete only pickup group number of SIP phone and keep pickup group number of FXS

2. [-/ALL/ALL] making a call by using station number on survival mode.
<Issue>
Extension number = Service group code + Station number
Users cannot make a call by using station number on survival mode.
<Reason>
OfficeServ didn’t save station number.
<Modified>
DM 2.1.5 GW Tel Number Save option is added.
If you set Use option to On and save Length 4 digits, OfficeServ save last 4 digit of extension number as station number.
This 4 digits station number is used for station number dialing.

[Other issues]
Fixed various Problems

1. [-/ALL/ALL] fixed an outgoing call problem of hot line
<Issue>
You cannot make an outgoing call by using hot lie to FXS which have 5 digits or more as extension number and located at same OfficeServ GW as caller.
<Reason>
Extension number = Service group code + Station number
Basically OfficeServ GW save only station number (max 4 digits) of extension number as tel number of OfficeServ GW and extension number (5 digits or more) is saved to another internal DB separately. When making an outgoing call to FXS of same GW, OfficeServ GW sends station number instead of extension number to SMC. SCM don’t know station number (max 4 digits) of OfficeServ GW and reject the call.
<Modified>
In this case, OfficeServ sends extension number (5 digits or more) to SCM.

2. [-/OS7400/ALL] fixed voice problem when using 2nd MGI16 card on OS7400.
<Issue>
When using 2nd MGI16 card of 2 MGI16 cards or more on OS7400, there is a voice problem between FXS phones of same OfficeServ GW.
<Reason>
Voice is connected using t-switch between FXS phones of same OfficeServ GW based on SDP of SIP message. When using 2nd MGI16 card of 2 MGI16 cards or more on OS7400, there is a problem of calculation of t-switch channel number.
<Modified>
In this case, a problem of calculation of t-switch channel number.is fixed.

3. [-/ALL/ALL] FXS cannot show station number excluding service group code as CID.
<Issue>
Extension number = Service group code + Station number
FXS cannot show station number excluding service group code as CID.
In case of same service group, FXS have to show only station number as CID.
<Reason>
From header of SIP INVITE have extension number and PAID of SIP INVITE have station number. OfficeServ GW always shows extension number of from header to display of FXS.
<Modified>
In case PAID exist, FXS display shows PAID of SIP INVITE. Otherwise FXS display shows from header of SIP INVITE.

4. [-/ALL/ALL] dialing without end of digit #
<Issue>
Input single figure to LCR Digit and input digit 6 to Length at DM 3.1.2 Routing Digits
If you dial 4 figures starting LCR digit, the call isn’t made automatically until dialing digit #
<Reason>
In this case, inter digit timer is not applied.
<Modified>
In this case, inter digit timer is applied. the call is made automatically without dialing digit #

5. [-/ALL/ALL] MGI16/MGI64 rebooting time is changed after network failure.
<Modified>
MGI16/MGI64 rebooting time is changed from 6 hours to 10 minutes after network failure.

6. [-/ALL/ALL] Fixed an issue which FXS ring didn’t ring.
<Issue>
SPI bus error of SLI3 card occurring intermittently
<Modified>
When SPI bus error of SLI3 card occurring, the error is recovered automatically.

[New features]
Added new features

1. [-/ALL/ALL] Virtual dial tone after hot line dialing.
< Description >
FXS user wants to hear a virtual dial tone after hot line dialing.
<Modified>
If DM2.5.2 Station On/Off Data - Use Insert Digit set to ON, FXS user can hear a virtual dial tone after hot line dialing.

2. [-/ALL/ALL] Call recording of FXS during conversion
< Description >
Call recording feature of FXS during conversion by using call recording feature code is added.
<Modified>
If FAX user does hookflash and dial ‘call recording feature code’ + ‘#’ during conversation, the call is recording.


5
0
Голосов нет
4
0
Голосов нет
3
0
Голосов нет
2
0
Голосов нет
1
0
Голосов нет
 
Всего голосов : 0

Если нужна помощь, услуги по настройке\обслуживанию или поставке оборудования, обращайтесь:
Телефон: +7 (499) 653-71-72 внутр. 101
С уважением, Денис.
Офисные АТС.ру
Аватара пользователя
Wi$e
Администратор
 
Торренты: 511
Комментарии: 63
Раздал: 198.26 Гб
Скачал: 2.29 Гб
Ратио: 86.531
Сообщения: 4564
Зарегистрирован: 18 июн 2006, 15:00
Откуда: Москва
Квалификация: Инженер ТЦ производителя
Организация: Офис-Девайс
Для Спасибо: Яндекс.Деньги:4100198401725

Вернуться в SCME OfficeServ Gateway ROMS

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 0


Установка и Настройка АТС



Пириногвые IP-АТС Symway. Консультация, Поставка, Внедрение.
cron